数据搜索系统,热门电子元器件搜索 |
|
SN74AUP1G80DCKT 数据表(PDF) 4 Page - Texas Instruments |
|
|
SN74AUP1G80DCKT 数据表(HTML) 4 Page - Texas Instruments |
4 / 41 page 4 SN74AUP1G80 SCES593F – JULY 2004 – REVISED JULY 2017 www.ti.com Product Folder Links: SN74AUP1G80 Submit Documentation Feedback Copyright © 2004–2017, Texas Instruments Incorporated (1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. (2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. 6 Specifications 6.1 Absolute Maximum Ratings over operating free-air temperature range (unless otherwise noted) (1) MIN MAX UNIT VCC Supply voltage –0.5 4.6 V VI Input voltage(2) –0.5 4.6 V VO Voltage range applied to any output in the high-impedance or power-off state (2) –0.5 4.6 V VO Voltage range applied to any output in the high or low state (2) –0.5 VCC + 0.5 V IIK Input clamp current VI < 0 –50 mA IOK Output clamp current VO < 0 –50 mA IO Continuous output current ±20 mA Continuous current through VCC or GND ±50 mA TJ Junction temperature 150 °C Tstg Storage temperature –65 150 °C (1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process. (2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process. 6.2 ESD Ratings VALUE UNIT V(ESD) Electrostatic discharge Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001(1) 2000 V Charged-device model (CDM), per JEDEC specification JESD22-C101(2) 1000 (1) All unused inputs of the device must be held at VCC or GND to assure proper device operation. See Implications of Slow or Floating CMOS Inputs, SCBA004. (2) Defined by the signal integrity requirements and design-goal priorities. 6.3 Recommended Operating Conditions See (1) MIN MAX UNIT VCC Supply voltage 0.8 3.6 V VIH High-level input voltage VCC = 0.8 V VCC V VCC = 1.1 V to 1.95 V 0.65 × VCC VCC = 2.3 V to 2.7 V 1.6 VCC = 3 V to 3.6 V 2 VIL Low-level input voltage VCC = 0.8 V 0 V VCC = 1.1 V to 1.95 V 0.35 × VCC VCC = 2.3 V to 2.7 V 0.7 VCC = 3 V to 3.6 V 0.9 VI Input voltage 0 3.6 V VO Output voltage 0 VCC V IOH High-level output current(2) VCC = 0.8 V –20 µA VCC = 1.1 V –1.1 mA VCC = 1.4 V –1.7 VCC = 1.65 –1.9 VCC = 2.3 V –3.1 VCC = 3 V –4 |
类似零件编号 - SN74AUP1G80DCKT |
|
类似说明 - SN74AUP1G80DCKT |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |