数据搜索系统,热门电子元器件搜索 |
|
AD9250BCPZRL7-250 数据表(PDF) 11 Page - Analog Devices |
|
AD9250BCPZRL7-250 数据表(HTML) 11 Page - Analog Devices |
11 / 45 page Data Sheet AD9250 Rev. E | Page 11 of 45 ABSOLUTE MAXIMUM RATINGS Table 6. Parameter Rating ELECTRICAL AVDD to AGND −0.3 V to +2.0 V DRVDD to AGND −0.3 V to +2.0 V DVDD to DGND −0.3 V to +2.0 V VIN+A/VIN+B, VIN−A/VIN−B to AGND −0.3 V to AVDD + 0.2 V CLK+, CLK− to AGND −0.3 V to AVDD + 0.2 V RFCLK to AGND −0.3 V to AVDD + 0.2 V VCM to AGND −0.3 V to AVDD + 0.2 V CS, PDWN to AGND −0.3 V to AVDD + 0.3 V SCLK to AGND −0.3 V to AVDD + 0.3 V SDIO to AGND −0.3 V to AVDD + 0.3 V RST to DGND −0.3 V to DVDD + 0.3 V FDA, FDB to DGND −0.3 V to DVDD + 0.3 V SERDOUT0+, SERDOUT0−, SERDOUT1+, SERDOUT1− to AGND −0.3 V to DRVDD + 0.3 V SYNCINB+, SYNCINB− to DGND −0.3 V to DVDD + 0.3 V SYSREF+, SYSREF− to AGND −0.3 V to AVDD + 0.3 V ENVIRONMENTAL Operating Temperature Range (Ambient) −40°C to +85°C Maximum Junction Temperature Under Bias 150°C Storage Temperature Range (Ambient) −65°C to +125°C Stresses at or above those listed under Absolute Maximum Ratings may cause permanent damage to the product. This is a stress rating only; functional operation of the product at these or any other conditions above those indicated in the operational section of this specification is not implied. Operation beyond the maximum operating conditions for extended periods may affect product reliability. THERMAL CHARACTERISTICS The exposed paddle must be soldered to the ground plane for the LFCSP package. This increases the reliability of the solder joints, maximizing the thermal capability of the package. Table 7. Thermal Resistance PackageType Airflow Velocity (m/sec) θJA1,2 θJC1,3 θJB1,4 Unit 48-Lead LFCSP 7 mm × 7 mm (CP-48-13) 0 25 2 14 °C/W 1.0 22 °C/W 2.5 20 °C/W 1 Per JEDEC 51-7, plus JEDEC 25-5 2S2P test board. 2 Per JEDEC JESD51-2 (still air) or JEDEC JESD51-6 (moving air). 3 Per MIL-STD-883, Method 1012.1. 4 Per JEDEC JESD51-8 (still air). Typical θJA is specified for a 4-layer printed circuit board (PCB) with a solid ground plane. As shown in Table 7, airflow increases heat dissipation, which reduces θJA. In addition, metal in direct contact with the package leads from metal traces, through holes, ground, and power planes reduces the θJA. ESD CAUTION |
类似零件编号 - AD9250BCPZRL7-250 |
|
类似说明 - AD9250BCPZRL7-250 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |