数据搜索系统,热门电子元器件搜索 |
|
AD1833A 数据表(PDF) 7 Page - Analog Devices |
|
AD1833A 数据表(HTML) 7 Page - Analog Devices |
7 / 20 page REV. 0 AD1833A –7– DEFINITION OF TERMS Dynamic Range The ratio of a full-scale input signal to the integrated input noise in the pass band (20 Hz to 20 kHz), expressed in decibels. Dynamic range is measured with a –60 dB input signal and is equal to (S/[THD + N]) +60 dB. Note that spurious harmonics are below the noise with a –60 dB input, so the noise level establishes the dynamic range. The dynamic range is specified with and without an A-Weight filter applied. Signal to (Total Harmonic Distortion + Noise) [S/(THD + N)] The ratio of the root-mean-square (rms) value of the fundamental input signal to the rms sum of all other spectral components in the pass band, expressed in decibels. Pass Band The region of the frequency spectrum unaffected by the attenuation of the digital decimator’s filter. Pass-Band Ripple The peak-to-peak variation in amplitude response from equal- amplitude input signal frequencies within the pass band, expressed in decibels. Stop Band The region of the frequency spectrum attenuated by the digital decimator’s filter to the degree specified by stop-band attenuation. Gain Error With a near full-scale input, the ratio of actual output to expected output, expressed as a percentage. Interchannel Gain Mismatch With identical near full-scale inputs, the ratio of outputs of the two stereo channels, expressed in decibels. Gain Drift Change in response to a nearly full-scale input with a change in temperature, expressed as parts-per-million (ppm/ ∞C). Crosstalk (EIAJ Method) Ratio of response on one channel with a grounded input to a full-scale 1 kHz sine wave input on the other channel, expressed in decibels. Power Supply Rejection With no analog input, signal present at the output when a 300 mV p-p signal is applied to the power supply pins, expressed in decibels of full scale. Group Delay Intuitively, the time interval required for an input pulse to appear at the converter’s output, expressed in ms. More precisely, the derivative of radian phase with respect to the radian frequency at a given frequency. Group Delay Variation The difference in group delays at different input frequencies. Specified as the difference between the largest and the smallest group delays in the pass band, expressed in ms. PIN FUNCTION DESCRIPTIONS (continued) Pin No. Mnemonic IN/OUT Description 40 OUTRP3 O DAC 3 Right Channel Positive Output. 42 FILTR Reference/Filter Capacitor Connection. Recommend 0.1 mF/10 mF decouple to analog ground. 43 FILTD Filter Capacitor Connection. Recommend 0.1 mF/10 mF decouple to analog ground. 45 OUTLP3 O DAC 3 Left Channel Positive Output. 46 OUTLN3 O DAC 3 Left Channel Negative Output. 47 OUTLP2 O DAC 2 Left Channel Positive Output. 48 OUTLN2 O DAC 2 Left Channel Negative Output. |
类似零件编号 - AD1833A |
|
类似说明 - AD1833A |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |