数据搜索系统,热门电子元器件搜索 |
|
1--21000--7 数据表(PDF) 1 Page - TE Connectivity Ltd |
|
1--21000--7 数据表(HTML) 1 Page - TE Connectivity Ltd |
1 / 4 page Instruction Sheet Base Assembly Universal 408--9875 LOC B 1 of 4 E 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company All Rights Reserved TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. *Trademark. Other logos, product and/or Company names may be trademarks of their respective owners. TOOLING ASSISTANCE CENTER 1--800--722--1111 PRODUCT INFORMATION 1--800--522--6752 This controlled document is subject to change. For latest revision and Regional Customer Service, visit our website at www.te.com 22 Mar 11 Rev A Arbor Tool 768338- 2 Figure 1 AMPLIMITE* .050 Series AMP--LATCH* Paddleboard 679235--1 (408--9892) 679176--1 (408--9928) CONNECTOR TYPES CONNECTOR- SPECIFIC KITS MANUAL ARBOR FRAME ASSEMBLY 91085--2 BASE SLIDE BASE OF FRAME ASSEMBLY (Ref) CABLE GUIDES FLUTED PLATE FRONT GUARD TOOL STOP (Not Shown) (Ref) CABLE CLAMP CABLE STOP UPPER TOOL MOUNT SLOT ON UPPER TOOL MOUNT POSITIONED TOWARD FRONT OF FRAME ASSEMBLY 1. INTRODUCTION These instructions cover installation, setup, and termination procedures for Base Assembly Universal Arbor Tool 768338--2. The universal arbor tool is used with connector--specific kits (listed in Figure 1) to terminate connectors onto .64 mm [.025 in.] centerline ribbon cable. The tooling assemblies are used in conjunction with Manual Arbor Frame Assembly 91085--2 (see Figure 1) or Pneumatic Auto--Cycle Unit 91112--3. For information regarding the setup and operation of the arbor frame assembly, refer to instruction sheet 408--7777 and 408--6732 for the auto--cycle unit. Installation and setup procedures for the connector--specific kits are available in 408--9928 (for 679176--1) and 408--9892 (for 679235--1). Read these instructions (and other referenced documents) thoroughly before terminating any connectors. Dimensions are in millimeters [followed by inches in brackets]. 2. DESCRIPTION (Figure 1) The universal arbor tool consists of an upper tool mount and a lower tooling assembly. The lower tooling consists of a machined base, a fluted plate, two cable guides, a cable clamp, a cable stop, and a front guard. The machined base allows the tooling to be moved into and out of the crimping area of the arbor frame assembly. The fluted plate is designed to provide proper seating of the ribbon cable. The cable guides aid in positioning the ribbon cable with the connector assembly, and the cable clamp holds the NOTE i |
类似零件编号 - 1--21000--7 |
|
类似说明 - 1--21000--7 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |