数据搜索系统,热门电子元器件搜索 |
|
ML15.121 数据表(PDF) 6 Page - PULS GmbH |
|
ML15.121 数据表(HTML) 6 Page - PULS GmbH |
6 / 23 page ML15.121 MiniLine-2 12V, 1.3A, SINGLE PHASE INPUT 6. OUTPUT Output voltage nom. 12V Adjustment range min. 12-15V guaranteed max. 16V *) at clockwise end position of potentiometer Factory setting 12.0V ±0.2%, at full load, cold unit Line regulation max. 10mV 85-264Vac Load regulation max. 100mV static value, 0A 1.3A Ripple and noise voltage max. 75mVpp 20Hz to 20MHz, 50Ohm Output capacitance typ. 1 650μF Output current nom. 1.3A at 12V, see Fig. 6-1 nom. 1.0A at 15V, see Fig. 6-1 Output power nom. 15W Short-circuit current min. hiccup mode, see Fig. 6-2 max. hiccup mode, see Fig. 6-2 *) This is the maximum output voltage which can occur at the clockwise end position of the potentiometer due to tolerances. It is not a guaranteed value which can be achieved. The typical value which can be achieved by turning the potentiometer to the clock-wise end position is 15.7V. Fig. 6-1 Output voltage vs. output current, typ. Fig. 6-2 Hiccup mode; output current at shorted output, 230Vac, typ. Output Voltage 0 0 2 4 6 16V 8 10 12 2.0A 1.0 0.6 0.2 1.4 0.8 0.4 1.2 14 1.8 Adjustment Range Output Current Continuous Hiccup Mode Output Current 0 1.7A 60ms t 240ms 240ms Peak current capability (up to several milliseconds) The power supply can deliver a peak current which is higher than the specified short term current. This helps to start current demanding loads or to safely operate subsequent circuit breakers. The extra current is supplied by the output capacitors inside the power supply. During this event, the capacitors will be discharged and causes a voltage dip on the output. Detailed curves can be found in chapter 22.1. Peak current voltage dips typ. from 12V to 7.8V at 2.6A for 50ms, resistive load typ. from 12V to 5.2V at 6.5A for 2ms, resistive load typ. from 12V to 2.0V at 6.5A for 5ms, resistive load Mar. 2013 / Rev. 2.1 DS-ML15.121-EN All parameters are specified at 12V, 1.3A, 230Vac input, 25°C ambient and after a 5 minutes run-in time unless otherwise noted. www.pulspower.com Phone +49 89 9278 0 Germany 6/23 |
类似零件编号 - ML15.121 |
|
类似说明 - ML15.121 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |