ST16C580CJ44 datasheet(7/41 Pages) EXAR

部件名	ST16C580CJ44

功能描述	UART WITH 16-BYTE FIFO?셲 AND INFRARED (IrDA) ENCODER/DECODER

Download	41 Pages

Scroll/Zoom	100%

制造商	EXAR [Exar Corporation]

网页	http://www.exar.com

标志

7 / 41 page

ST16C580

7

Rev. 1.20

UART’s transmit or receive operation.

-RI

39

43

41

I

Ring Indicator (active low) - A logic 0 on this pin indicates the

modem has received a ringing signal from the telephone

line. A logic 1 transition on this input pin will generate an

interrupt.

-RTS

32

36

32

O

Request to Send (active low) - A logic 0 on the -RTS pin

indicates the transmitter has data ready and waiting to send.

Writing a logic 1 in the modem control register (MCR bit-1)

will set this pin to a logic 0 indicating data is available. After

a reset this pin will be set to a logic 1. This pin only affects

the transmit and receive operations when Auto RTS func-

tion is enabled via the Enhanced Feature Register (EFR)

bit-6, for hardware flow control operation.

RX / IRRX

10

11

7

I

Receive Data - This pin provides the serial receive data

input to the 580. Two user selectable interface options are

available. The first option supports the standard modem

interface. The second option provides an Infrared decoder

interface, see figures 2/3. When using the standard modem

interface, the RX signal will be a logic 1 during reset, idle (no

data), or when the transmitter is disabled. The inactive state

(no data) for the Infrared decoder interface is a logic 0. MCR

bit-6 selects the standard modem or infrared interface.

During the local loop-back mode, the RX input pin is

disabled and TX data is internally connected to the UART

RX Input, internally, see figure 12.

TX / IRTX

11

13

8

O

Transmit Data - This pin provides the serial transmit data

from the 580. Two user selectable interface options are

available. The first user option supports a standard modem

interface. The second option provides an Infrared encoder

interface, see figures 2/3. When using the standard modem

interface, the TX signal will be a logic 1 during reset, idle (no

data), or when the transmitter is disabled. The inactive state

(no data) for the Infrared encoder/ decoder interface is a

Logic 0. MCR bit-6 selects the standard modem or infrared

interface. During the local loop-back mode, the TX input pin

is disabled and TX data is internally connected to the UART

RX Input, see figure 12.

SYMBOL DESCRIPTION

Symbol

Signal

Pin Description

40

44

48

type

类似零件编号 - ST16C580CJ44

制造商	部件名	数据表	功能描述
Exar Corporation	ST16C580CQ48	212Kb / 39P	UART WITH 16-BYTE FIFO?셲 AND INFRARED (IrDA) ENCODER/DECODER

More results

类似说明 - ST16C580CJ44

制造商	部件名	数据表	功能描述
Exar Corporation	ST16C580	212Kb / 39P	UART WITH 16-BYTE FIFO?셲 AND INFRARED (IrDA) ENCODER/DECODER
NXP Semiconductors	SC16C554	276Kb / 55P	Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder Rev. 05-10 May 2004
NXP Semiconductors	SC16C654	647Kb / 52P	Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder Rev. 04-19 June 2003
Exar Corporation	ST16654	444Kb / 49P	QUAD UART WITH 64-BYTE FIFO AND INFRARED (IrDA) ENCODER/DECODER
NXP Semiconductors	SC16C550	639Kb / 52P	Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder Rev. 05-19 June 2003
NXP Semiconductors	SC16C650A	642Kb / 50P	Universal Asynchronous Receiver/Transmitter (UART) with 32-byte FIFO and infrared (IrDA) encoder/decoder Rev. 04-20 June 2003
Exar Corporation	ST16C550	227Kb / 35P	UART WITH 16-BYTE FIFO?셲
Exar Corporation	ST16C550	241Kb / 35P	UART WITH 16-BYTE FIFO?셲
NXP Semiconductors	SC16C650B	881Kb / 51P	5 V, 3.3 V and 2.5 V UART with 32-byte FIFOs and infrared (IrDA) encoder/decoder Rev. 03-10 December 2004
NXP Semiconductors	SC16C2550	603Kb / 46P	Dual UART with 16 bytes of transmit and receive FIFOs and infrared (IrDA) encoder/decoder Rev. 03-19 June 2003