TPA2010D1

SLOS417A − OCTOBER 2003 − REVISED DECEMBER 2003

www.ti.com

2

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with appropriate

precautions. Failure to observe proper handling and installation procedures can cause damage.

ORDERING INFORMATION

TA

PACKAGE

PART NUMBER

SYMBOL

−40

°C to 85°C

Wafer chip scale package (YEF)

TPA2010D1YEF (1)

AJZ

−40

°C to 85°C

Wafer chip scale packaging − Lead free (YZF)

TPA2010D1YZF (1)

AKO

(1) The YEF and YZF packages are only available taped and reeled. To order add the suffix “R” to the end of the part number for a reel of 3000, or

add the suffix “T” to the end of the part number for a reel of 250 (e.g. TPA2010D1YEFR).

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range unless otherwise noted(1)

TPA2010D1

Supply voltage, VDD

In active mode

−0.3 V to 6 V

Supply voltage, VDD

In SHUTDOWN mode

−0.3 V to 7 V

Input voltage, VI

−0.3 V to VDD + 0.3 V

Continuous total power dissipation

See Dissipation Rating Table

Operating free-air temperature, TA

−40

°C to 85°C

Operating junction temperature, TJ

−40

°C to 125°C

Storage temperature, Tstg

−65

°C to 150°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

YZF

260

°C

Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds

YEF

235

°C

(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

RECOMMENDED OPERATING CONDITIONS

MIN

NOM

MAX

UNIT

Supply voltage, VDD

2.5

5.5

V

High-level input voltage, VIH

SHUTDOWN

1.3

VDD

V

Low-level input voltage, VIL

SHUTDOWN

0

0.35

V

Input resistor, RI

Gain

≤ 20 V/V (26 dB)

15

k

Ω

Common mode input voltage range, VIC

VDD = 2.5 V, 5.5 V, CMRR ≤ −49 dB

0.5

VDD−0.8

V

−40

85

°C

PACKAGE DISSIPATION RATINGS

PACKAGE

DERATING

FACTOR(1)

TA ≤ 25°C

POWER RATING

TA = 70°C

POWER RATING

TA = 85°C

POWER RATING

YEF

7.8 mW/

°C

780 mW

429 mW

312 mW

YZF

7.8 mW/

°C

780 mW

429 mW

312 mW

(1) Derating factor measure with High K board.