ADC10061, ADC10062, ADC10064

www.ti.com

SNAS069E – JUNE 1999 – REVISED MARCH 2013

Note that the sixteen comparators used in the first flash conversion are reused for the second flash. Thus, the

multistep conversion technique used in the ADC10061, ADC10062, and ADC10064 needs only a small fraction

of the number of comparators that would be required for a traditional flash converter, and far fewer than would be

used in a conventional half-flash approach. This allows the ADC10061, ADC10062, and ADC10064 to perform

high-speed conversions without excessive power drain.

Figure 20. Block Diagram of the Multistep Converter Architecture

SIMILAR PRODUCT DIFFERENCES

The ADC1006x, ADC1046x and ADC1066x (where "x" indicates the number of multiplexer inputs) are similar

devices with different specification limits. The differences in these device families are summarized below.

Device Family

ILE, TUE, PSS

THD, SNR, ENOB

Max. Conversion Time

ADC1006x

Ensured

-

900ns

ADC1046x

-

Ensured

900ns

ADC1066x

-

Ensured

466ns

Copyright © 1999–2013, Texas Instruments Incorporated

Submit Documentation Feedback

11

Product Folder Links: ADC10061 ADC10062 ADC10064