数据搜索系统,热门电子元器件搜索 |
|
SN74ACT1071DR 数据表(PDF) 2 Page - Texas Instruments |
|
|
SN74ACT1071DR 数据表(HTML) 2 Page - Texas Instruments |
2 / 11 page SN74ACT1071 10-BIT BUS-TERMINATION ARRAY WITH BUS-HOLD FUNCTION SCAS192 – D3994, MARCH 1992 – REVISED APRIL 1993 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265 4–2 absolute maximum ratings over operating free-air temperature range (unless otherwise noted)† Supply voltage range, VCC – 0.5 V to 7 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input voltage range, VI (see Note 1) – 0.5 V to VCC + 0.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous input clamp current, IIK (VI < 0 or VI > VCC) ±20 mA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Positive-peak input clamp current, IIK (VI > VCC) (tw < 1 µs, duty cycle < 20%) 100 mA . . . . . . . . . . . . . . . . . Negative-peak input clamp current, IIK (VI < 0) (tw < 1 µs, duty cycle < 20%) –100 mA . . . . . . . . . . . . . . . . . . Storage temperature range – 65 °C to 150°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . † Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input negative-voltage rating may be exceeded if the input clamp-current rating is observed. recommended operating conditions MIN MAX UNIT VCC Supply voltage 4.5 5.5 V VIH High-level input voltage 2.5 V VIL Low-level input voltage 0.8 V VI Input voltage 0 VCC V TA Operating free-air temperature –40 85 °C electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS TA = 25 °C MIN MAX UNIT PARAMETER TEST CONDITIONS MIN TYP† MAX MIN MAX UNIT IIL VCC = 4.5 to 5.5 V, VI = 0.8 V 0.15 0.3 0.9 0.1 1 mA IIH VCC = 4.5 to 5.5 V, VI = 2.5 V – 0.2 – 0.5 –1.4 – 0.15 –1.5 mA VIKL IIN = –18 mA –1.5 –1.5 V VIKH IIN = 18 mA VCC +2 VCC +2 V ICC‡ VCC = 5.5 V, Inputs open 4 40 µA ∆ICC§ One input at 3.4 V, Other inputs at VCC or GND 0.9 1 mA Ci VI = VCC or GND 3 pF † All typical values are at VCC = 5 V. ‡ Inputs may be set high or low prior to the ICC measurement. § This is the increase in supply current for each input that is at one of the specified TTL voltage levels rather than 0 V or VCC. |
类似零件编号 - SN74ACT1071DR |
|
类似说明 - SN74ACT1071DR |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |