SS5782

Unipolar Hall Switch

3

V3.10

Nov 1, 2013

Pins Definition and Description

Unique Features

Based on mixed signal CMOS technology, SS5782 is a Hall-effect device with high magnetic sensitivity. This

multi-purpose latch meets most of the application requirements.

The chopper-stabilized amplifier uses switched capacitor technique to suppress the offset generally observed with

Hall sensors and amplifiers. The CMOS technology makes this advanced technique possible and contributes to

smaller chip size and lower current consumption than bipolar technology. The small chip size is also an important

factor to minimize the effect of physical stress. This combination results in more stable magnetic characteristics

and enables faster and more precise design.

The wide operating voltage from 2.5V to 24V, low current consumption and large choice of operating tempera-

ture range according to “L”, “K”and “E” specifications make this device suitable for automotive, industrial and

consumer applications.

Absolute Maximum Ratings

Parameter

Symbol

Value

Units

Supply Voltage

28

V

Supply Current

50

mA

Output Voltage

28

V

Output Current

50

mA

Storage Temperature Range

-50 to 150

°C

Maximum Junction Temperature

165

°C

SOT Pin

№ SIP Pin №

Name

Type

Function

1

1

Supply

Supply Voltage pin

2

3

OUT

Output

Open Drain Output pin

3

2

GND

Ground

Ground pin