数据搜索系统,热门电子元器件搜索 |
|
GS2989-INTE3Z 数据表(PDF) 1 Page - Gennum Corporation |
|
GS2989-INTE3Z 数据表(HTML) 1 Page - Gennum Corporation |
1 / 19 page GS2989 Dual-Slew-Rate, Dual-Output Cable Driver with 3Gb/s Capability 1 of 19 GS2989 Dual-Slew-Rate, Dual-Output Cable Driver with 3Gb/s Capability Data Sheet 52133 - 4 December 2010 www.gennum.com Features • SMPTE 424M, SMPTE 292M and SMPTE 259M compliant • Supports DVB-ASI at 270Mb/s • Supports data rates from 270Mb/s to 2.97Gb/s • Wide common-mode range input buffer 100mV sensitivity supports DC-coupling to industry-standard differential logic on-chip 100Ω differential data input termination • Input signal trace equalization • Dual differential coaxial-cable-driving outputs selectable slew rates adjustable output swing from 500mVpp to 1800mVpp independent DISABLE controls for each output • Robust output signal presence function • Excellent output eye quality • Power supply operation at 3.3V or 2.5V • 110mW power consumption (2.5V supply) • Operating temperature range: -40°C to +85°C • Small footprint QFN package (4mm x 4mm) new dual-output pin out use the GS2988 for a single-output variant that is drop-in compatible to the GS2978 • Pb-free and RoHS compliant Applications • SMPTE 424M, SMPTE 292M and SMPTE 259M coaxial cable serial digital interfaces Description The GS2989 is a high-speed BiCMOS integrated circuit designed to drive one to four 75Ω coaxial cables. The GS2989 may drive data rates up to 2.97Gb/s and provides two selectable slew rates in order to achieve compliance to SMPTE 424M, SMPTE 292M and SMPTE 259M. The GS2989 accepts industry-standard differential input levels including LVPECL and CML. Input trace equalization compensates for up to 10 inches of FR4 trace loss while in HD and 3G modes. This feature can be disabled using the EQ_EN pin. The DISABLE1 and DISABLE2 pins power-down the first and second output drivers respectively, leaving the serial data outputs in a high-impedance state. When applied simultaneously, the entire device is powered-down. The GS2989 features adjustable output swing using an external bias resistor. The single-ended output swing is adjustable from 500mVpp to 1800mVpp. An output signal presence function, the OSP pin, indicates whether an active signal is present at the output of the GS2989. The GS2989 can be powered from either a 3.3V or a 2.5V supply. Power consumption is typically 110mW using a 2.5V power supply with one output enabled. The GS2989 is Pb-free, and the encapsulation compound does not contain halogenated flame retardant. This component and all homogeneous subcomponents are RoHS compliant. |
类似零件编号 - GS2989-INTE3Z |
|
类似说明 - GS2989-INTE3Z |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |