数据搜索系统,热门电子元器件搜索 |
|
TEA18363T 数据表(PDF) 11 Page - NXP Semiconductors |
|
TEA18363T 数据表(HTML) 11 Page - NXP Semiconductors |
11 / 27 page TEA18363T All information provided in this document is subject to legal disclaimers. © NXP B.V. 2013. All rights reserved. Product data sheet Rev. 2 — 12 December 2013 11 of 27 NXP Semiconductors TEA18363T GreenChip SMPS control IC During system start-up, the maximum overpower is limited to 100 % and the maximum time-out period is lowered to 40 ms. Once the output voltage is within its regulation level (voltage on the CTRL pin is below 5 V), the maximum overpower is switched to 150 % and the maximum time-out period returns to 200 ms limiting the output power to a minimum at a shorted output. Lowering the maximum output power and shortening the overpower timer ensure that the input power of the system is limited to < 5 W at a shorted output. Due to the limited output power, the output voltage drops if the load requires more than 150 %. As a result, the VCC voltage drops as well and UVLO can be triggered. To retain the same response in an overpower situation (whether UVLO is triggered or not) the system enters the protection mode (latch or safe restart) when overpower + UVLO is detected. The system entering the protection mode does not depend on the value of the OP counter. 7.6.2 OverVoltage Protection (OVP) An accurate output OVP is implemented by measuring the voltage at the AUX pin during the secondary stroke. As the auxiliary winding voltage is a well-defined replica of the output voltage, the OVP level can be adjusted by the external resistor divider ratio RAUX2 /(RAUX1 +RAUX2). An internal counter of four gate pulses prevents false OVP detection which can occur during ESD or lightning events. 7.6.3 OverTemperature Protection (OTP) Integrated OTP ensures that the IC stops switching if the junction temperature exceeds the thermal temperature shutdown limit. OTP is a latched protection. 7.6.4 Maximum on-time The controller limits the on-time of the external MOSFET to 55 s. When the on-time is longer, the IC stops switching and enters safe restart mode. Fig 9. Overpower protection curves |
类似零件编号 - TEA18363T |
|
类似说明 - TEA18363T |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |