数据搜索系统,热门电子元器件搜索 |
|
ADT7519 数据表(PDF) 6 Page - Analog Devices |
|
ADT7519 数据表(HTML) 6 Page - Analog Devices |
6 / 44 page ADT7516/ADT7517/ADT7519 Rev. B | Page 6 of 44 Parameter1 Min Typ Max Unit Conditions/Comments IDD (Power-Down Mode) 10 μA VDD = 3.3 V, VIH = VDD, and VIL = GND 10 μA VDD = 5 V, VIH = VDD, and VIL = GND Power Dissipation 10 mW VDD = 3.3 V, normal mode 33 μW VDD = 3.3 V, shutdown mode 1 See the Terminology section. 2 DC specifications are tested with the outputs unloaded. 3 Linearity is tested using a reduced code range: ADT7516 (Code 115 to 4095); ADT7517 (Code 28 to 1023); ADT7519 (Code 8 to 255). 4 Guaranteed by design and characterization, not production tested. 5 Round robin is the continuous sequential measurement of the following channels: VDD, internal temperature, external temperature (AIN1, AIN2), AIN3, and AIN4. 6 For the amplifier output to reach its minimum voltage, the offset error must be negative. For the amplifier output to reach its maximum voltage (VREF = VDD), the offset plus gain error must be positive. 7 The SDA and SCL timing is measured with the input filters turned on to meet the fast mode I2C specification. Switching off the input filters improves the transfer rate but has a negative effect on the EMC behavior of the part. 8 Guaranteed by design, not production tested. All I2C timing specifications are for fast mode operation but the interface is still capable of handling the slower standard rate specifications. 9 The interface is also capable of handling the I2C standard mode rise time specification of 1000 ns. 10 All input signals are specified with tr = tf = 5 ns (10% to 90% of VDD), and timed from a voltage level of 1.6 V. 11 Measured with the load circuit shown in Figure 4. 12 The IDD specification is valid for all DAC codes and full-scale analog input voltages. Interface inactive. All DACs and ADCs active. Load currents excluded. DAC AC CHARACTERISTICS VDD = 2.7 V to 5.5 V, RL = 4.7 kΩ to GND, CL = 200 pF to GND, 4.7 kΩ to VDD, all specifications TMIN to TMAX, unless otherwise noted. Table 2. Parameter1, 2 Min Typ3 Max Unit Conditions/Comments Output Voltage Settling Time VREF = VDD = 5 V ADT7519 6 8 μs 1/4 scale to 3/4 scale change (0x40 to 0xC0) ADT7517 7 9 μs 1/4 scale to 3/4 scale change (0x100 to 0x300) ADT7516 8 10 μs 1/4 scale to 3/4 scale change (0x400 to 0xC00) Slew Rate 0.7 V/μs Major-Code Change Glitch Energy 12 nV-s 1 LSB change around major carry Digital Feedthrough 0.5 nV-s Digital Crosstalk 1 nV-s Analog Crosstalk 0.5 nV-s DAC-to-DAC Crosstalk 3 nV-s Multiplying Bandwidth 200 kHz VREF = 2 V ±0.1 V p-p Total Harmonic Distortion –70 dB VREF = 2.5 V ±0.1 V p-p; frequency = 10 kHz 1 See the Terminology section. 2 Guaranteed by design and characterization, not production tested. 3 At 25°C. |
类似零件编号 - ADT7519_15 |
|
类似说明 - ADT7519_15 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |