数据搜索系统,热门电子元器件搜索 |
|
CB290 数据表(PDF) 2 Page - Marktech Corporate |
|
CB290 数据表(HTML) 2 Page - Marktech Corporate |
2 / 4 page Copyright © 2008 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and G•SiC are registered trademarks, and SuperBlue is a trademark of Cree, Inc. 2 CPR3DN Rev. - Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com Maximum Ratings at T A = 25°C Notes &3 C430CB290-S200 DC Forward Current 30 mA Peak Forward Current (1/10 duty cycle @ 1kHz) 70 mA LED Junction Temperature 125°C Reverse Voltage 5 V Operating Temperature Range -40°C to +100°C Storage Temperature Range -40°C to +100°C Electrostatic Discharge Threshold (HBM) Note 2 1000 V Electrostatic Discharge Classification (MIL-STD-883E) Note 2 Class 2 Typical Electrical/Optical Characteristics at T A = 25°C, If = 20 mA Note 3 Part Number Forward Voltage (V f, V) Radiant Flux (P, mW) Reverse Current [I(Vr=5V), μA] Peak Wavelength ( λ d, nm) Dominant Wavelength ( λ d, nm) Full Width Half Max ( λ D, nm) Typ. Max. Min. Typ. Max. Typ. Min. Typ. Max. Typ. C430CB290-S2100 4.0 4.5 0.85 1.3 10 423 461 463 465 59 Mechanical Specifications C430CB290-S200 Description Dimension Tolerance P-N Junction Area (μm2) 240 x 240 ± 35 Top Area (μm2) 260 x 260 ± 35 Bottom Area (μm2) 260 x 260 ± 35 Chip Thickness (μm) 250 ± 25 Au Bond Pad Diameter (μm) 114 ± 20 Au Bond Pad Thickness (μm) 1.1 ± 0.5 Back Contact Metal Diameter (μm) 114 ± 20 Notes: Maximum ratings are package dependent. The above ratings were determined using a T-1 3/4 package (with Hysol OS4000 epoxy) for characterization. Ratings for other packages may differ. The forward currents (DC and Peak) are not limited by the die but by the effect of the LED junction temperature on the package. The junction temperature limit of 125°C is a limit of the T-1 3/4 package; junction temperature should be characterized in a specific package to determine limitations. Assembly processing temperature must not exceed 325°C (<5 seconds). Product resistance to electrostatic discharge (ESD) according to the HBM is measured by simulating ESD using a rapid avalanche energy test (RAET). The RAET procedures are designed to approximate the maximum ESD ratings shown. The ESD classification of Class 2 is based on sample testing according to MIL-STD-883E. All products conform to the listed minimum and maximum specifications for electrical and optical characteristics when assembled and operated at 20 mA within the maximum ratings shown above. Efficiency decreases at higher currents. Typical values given are within the range of average values expected by the manufacturer in large quantities and are provided for information only. All measurements were made using lamps in T-1 3/4 packages (with Hysol OS4000 epoxy). Optical characteristics measured in an integrating sphere using Illuminance A. 1. 2. 3. |
类似说明 - CB290 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |