数据搜索系统,热门电子元器件搜索 |
|
AM4951RMMTR-G1 数据表(PDF) 9 Page - Diodes Incorporated |
|
AM4951RMMTR-G1 数据表(HTML) 9 Page - Diodes Incorporated |
9 / 14 page Data Sheet BTL Drive Single-phase Full-wave Fan Motor Driver AM4951/R/2 Apr. 2012 Rev. 1. 4 BCD Semiconductor Manufacturing Limited 9 Typical Application Note 2: Adding D1 can protect the IC from destruction by reverse connection. If D1 is used, it is necessary to insert a capacitor C1 to provide a regenerative current route. Similarly, if there is no nearby capacitor on the fan power supply line, C1 will also be necessary to improve reliability. Its capacity should be larger than 2.2 µF. Note 3: If the Hall sensor bias is taken from VCC, A 1/2 VCC bias, as shown in the figure must be used. Adjusting the value of R1 and R2 may achieve better startup characteristics and efficiency, even quiet operation. Note 4: This pin must be left open if unused. Note 5: If the line between Hall sensor output and Hall sensor input of IC is long, the noise may occur in this line. But it can be eliminated by adding a capacitor C3. Note 6: Each of R2, R3, R4 and R5 (AM4951/R only) is recommended to be 51k Ω typical. R1 is recommended to be 2k and must be added when VCC is larger than 20V. Note 7: The package of AH920 is SOT-23-3. If it is packaged in TO-92S-3,please exchange IN- with IN+. Figure 9. Typical Application of AM4951/R |
类似零件编号 - AM4951RMMTR-G1 |
|
类似说明 - AM4951RMMTR-G1 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |