数据搜索系统,热门电子元器件搜索 |
|
M-982-02T 数据表(PDF) 2 Page - Clare, Inc. |
|
M-982-02T 数据表(HTML) 2 Page - Clare, Inc. |
2 / 7 page www.clare.com 2 M-982-02 Rev. 4 Absolute Maximum Ratings Storage Temperature -40 to 150°C Operating Ambient Temperature -40 to 85°C V DD 7V Input Voltage on SIGIN V SS - 6.5 to VDD + 0.3V Input Voltages (except SIGIN) V SS - 0.3 to VDD + 0.3 V Lead Soldering Temperature 260° C for 5 seconds Note: Exceeding these ratings may permanently damage the M-982-02. Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the opera- tional sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extend- ed period may degrade the device and effect its reliability. Specifications Parameter Conditions Min Max Units Notes Operating V DD - 2.7 5.5 V - Conditions Power supply noise 0.1 - 5 kHz - 20 mV p-p Power Current drain (I DD)VREF open - 15 mA - V REF V REF - 48% of V DD 52% of V DD V- Impedance - 3.25 8.25 kW Signal Frequency range in-band signal -1 +1 % of f o 1 Detection Level: V DD = 5.0V XRANGE = open -30 0 dBm (24.5 mV) (775 mV) XRANGE = V SS -40 -10 dBm (7.8 mV) (245 mV) - Level: V DD = 3.0V XRANGE = open -33 (17.4 mV) -3 (549 mV) dBm XRANGE = V SS -43 (5.5 mV) -13 (173.5 mV) dBm Duration (t DD) - 200 - ms Bridge time (t BB)- - 20 ms Level skew between adjacent inband signals for detection of both - 6 dB High level to low level signal for high = 0 dBm (775 mV) 1 - s - detection of both (t IL) low = -30 dBm (24.5 mV) Time to output (t DO) SIGIN ≈ -24 dBm - 200 ms SIGIN < -24 dBm - 240 ms - Time from DET n to STROBE (t DS)- - 10 ms Signal Frequency range - -6 -6 % of f o 1 Rejection Level: V DD = 5.0V XRANGE = open - -50(2.5 mV) dBm XRANGE = V SS - -60 (0.8 mV) dBm Level: V DD = 3.0V XRANGE= open - -53 (1.7 mV) dBm XRANGE = V SS - -63 (.6 mV) dBm Interval duration (t ID) - 160 - ms Time to output (T IO) - - 200 ms Outputs DET n, V OL I SINK = -1mA - 0.5 V STROBE pins V OH I SOURCE=1mA V DD -0.5 - V - DET n pins I OZ V O=VDD, VSS -1 µA Inputs EN, OE, XRANGE, VIL - - 0.5 V - MODE, PD pins VIH VDD = 5V VDD - 2.0 - V VDD = 2.7V VDD - 0.5 - V Pull-up and Pull-down MODE = VSS VDD = 5V 12.5 50 µA currents VDD = 2.7V 4 20 µA /Xrange = VSS - 2 6 µA PD =VDD - 4 10 µA |
类似零件编号 - M-982-02T |
|
类似说明 - M-982-02T |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |