数据搜索系统,热门电子元器件搜索
  Chinese  ▼
ALLDATASHEETCN.COM

X  

CAR1212FPXXXZ01A 数据表(PDF) 4 Page - Lineage Power Corporation

部件名 CAR1212FPXXXZ01A
功能描述  85Vac to 264Vac 12Vdc @ 1250W; 5 Vdc @ 0.5A
Download  7 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
制造商  LINEAGEPOWER [Lineage Power Corporation]
网页  http://www.lineagepower.com
标志 LINEAGEPOWER - Lineage Power Corporation

CAR1212FPXXXZ01A 数据表(HTML) 4 Page - Lineage Power Corporation

  CAR1212FPXXXZ01A Datasheet HTML 1Page - Lineage Power Corporation CAR1212FPXXXZ01A Datasheet HTML 2Page - Lineage Power Corporation CAR1212FPXXXZ01A Datasheet HTML 3Page - Lineage Power Corporation CAR1212FPXXXZ01A Datasheet HTML 4Page - Lineage Power Corporation CAR1212FPXXXZ01A Datasheet HTML 5Page - Lineage Power Corporation CAR1212FPXXXZ01A Datasheet HTML 6Page - Lineage Power Corporation CAR1212FPXXXZ01A Datasheet HTML 7Page - Lineage Power Corporation  
Zoom Inzoom in Zoom Outzoom out
 4 / 7 page
background image
GE Energy
CAR1212FP series rectifier
Input: 85Vac to 264Vac; Output: 12 Vdc @ 1250W; 5 Vdc @ 0.5A
July 20, 2012
©2012 General Electric Company. All rights reserved.
Page 4
EMC
Parameter
Criteria
Standard
Level
Test
AC input
Conducted emissions
EN55022, FCC Docket 20780 part 15, subpart J
EN61000-3-2
A*
0.15 – 30MHz
0 – 2 KHz
Radiated emissions
EN55022
A*
30 – 10000MHz
Voltage dips
EN61000-4-11
A
-30%, 10ms
C
-60%, 100ms
C
-100%, 5sec
Voltage surge
EN61000-4-5
A
4kV, 1.2/50µs, common mode
A
2kV, 1.2/50µs, differential mode
immunity
Fast transients
EN61000-4-4
B
5/50ns, 2kV (common mode)
Enclosure immunity
Conducted RF fields
EN61000-4-6
A
130dBµV, 0.15-80MHz, 80% AM
Radiated RF fields
EN61000-4-3
A
10V/m, 80-1000MHz, 80% AM
ENV 50140
A
ESD
EN61000-4-2
B
4kV contact, 8kV air
* Note: Contact the factory for a recommended external EMI filter to meet Class B emissions
Status and Control
Details of analog controls are provided in this data sheet
under Signal Definitions. GE Energy will provide separate
application notes on the I2C protocol. Contact your local GE
Energy representative for details.
Signal Definitions
All signals and outputs are referenced to Output return.
These include ‘Vstb return’ and ‘Signal return’.
Input Signals
Voltage programming (Vprog): An analog voltage on this
signal can vary the output voltage ± 5% from 11.4Vdc to
12.6Vdc. The equation of this signal is:
Vout = 11.4 + (Vprog * 0.3) 0 < Vprog < 4
If Vprog is > 4V or left open the programming signal is
ignored and the unit output is set at the setpoint of 12Vdc.
Load share (Ishare): This is a single wire analog signal that is
generated and acted upon automatically by power supplies
connected in parallel. The Ishare pins should be tied
together for power supplies if active current share among
the power supplies is desired. No resistors or capacitors
should get connected to this pin.
Remote ON/OFF: Controls the presence of the main 12Vdc
output voltage. This is an open collector, TTL level control
signal. This signal needs to be pulled HI externally through a
resistor. Maximum collector voltage is 12Vdc and the
maximum sink current is 20mA. A Logic 1 (TTL HI level)
turns ON the 12Vdc output, while a Logic 0 (TTL LO level)
turns OFF the 12Vdc output.
This signal is not overwritten by the firmware ON/OFF
instruction. The default firmware setting is ON. An OFF
command either through this signal or firmware would turn
OFF the power supply.
The default state re-initializes if bias power is interrupted to
the processor.
Enable: This is a short signal pin that controls the presence
of the 12Vdc main output. This pin should be connected to
‘output return’ on the system side of the output connector.
The purpose of this pin is to ensure that the output turns ON
after engagement of the power blades and turns OFF prior
to disengagement of the power blades.
Write protect (WP): This signal protects the contents of the
EEPROM from accidental over writing. When left open the
EEPROM is write protected. A LO (TTL compatible) permits
writing to the EEPROM. This signal is pulled HI internally by
the power supply. Used only for factory programming
Output signals
Output current monitor (Imon): A voltage level of 0.05V / A
proportional to the delivered output current is present on
this pin. Accuracy ±10% of FL at loads > 25% of FL.
AC OK: A TTL compatible status signal representing whether
the input voltage is within the anticipated range. This signal
needs to be pulled HI externally through a resistor.
Maximum sink current ≤ 20mA and the max voltage is
12Vdc. Open collector (HI) on this signal indicates that the
input voltage is applied within the specified input range.
DC OK: A TTL compatible status signal representing
whether the output voltage is present. This signal needs to
be pulled HI externally through a resistor. Maximum sink


类似零件编号 - CAR1212FPXXXZ01A

制造商部件名数据表功能描述
logo
Lineage Power Corporati...
CAR1212FP LINEAGEPOWER-CAR1212FP Datasheet
828Kb / 2P
   1200 Watt 12V Front End Power Supply
CAR1212FPB-1A LINEAGEPOWER-CAR1212FPB-1A Datasheet
828Kb / 2P
   1200 Watt 12V Front End Power Supply
CAR1212FPBY0-1A LINEAGEPOWER-CAR1212FPBY0-1A Datasheet
828Kb / 2P
   1200 Watt 12V Front End Power Supply
CAR1212FPBZ0-1A LINEAGEPOWER-CAR1212FPBZ0-1A Datasheet
828Kb / 2P
   1200 Watt 12V Front End Power Supply
CAR1212FPC-1A LINEAGEPOWER-CAR1212FPC-1A Datasheet
828Kb / 2P
   1200 Watt 12V Front End Power Supply
More results

类似说明 - CAR1212FPXXXZ01A

制造商部件名数据表功能描述
logo
General Electric Compan...
CAR0812FP GEC-CAR0812FP Datasheet
322Kb / 15P
   Input: 85VAC to 264VAC; Output: 12VDC @ 850W; 3.3VDC or 5 VDC @ 1A
May 2, 2013
logo
General Semiconductor
EN55022 GE-EN55022 Datasheet
197Kb / 7P
   CAR2512FP series rectifier Input: 90Vac to 264Vac Output: 12Vdc 208A 3.3Vdc or 5 Vdc 1A
logo
Lineage Power Corporati...
CAR2512TE LINEAGEPOWER-CAR2512TE Datasheet
303Kb / 15P
   90VAC to 264VAC 12VDC@ 2500W; 3.3/5VDC standby @ 15W
CAR2548FP LINEAGEPOWER-CAR2548FP_14 Datasheet
304Kb / 15P
   90Vac to 264Vac 48Vdc @ 2500W; 3.3Vdc or 5 Vdc @ 1A
CLP0212 LINEAGEPOWER-CLP0212 Datasheet
1Mb / 15P
   90 - 264Vac input; 12Vdc output; 200W Output Power
CAR1212DC LINEAGEPOWER-CAR1212DC_14 Datasheet
657Kb / 16P
   -36VD C to -75VDC 12VDC @ 1200W; 3.3VDC or 5 VDC @ 1A
logo
Tripp Lite. All Rights ...
APSX1250 TRIPPLITE-APSX1250 Datasheet
509Kb / 4P
   PowerVerter APS X 1250W 12VDC 230V Inverter/Charger with Auto-Transfer Switching, 2-C13 Outlets
logo
Torex Semiconductor
XC9404 TOREX-XC9404 Datasheet
299Kb / 16P
   85VAC ~ 270VAC
logo
Teledyne Technologies I...
SR75-3 TELEDYNE-SR75-3 Datasheet
193Kb / 3P
   0.5A, 400 Vdc Optically Isolated
logo
Sanyo Semicon Device
L78M00T SANYO-L78M00T Datasheet
230Kb / 8P
   5 to 24V 0.5A 3-Pin Voltage Regulators
More results


Html Pages

1 2 3 4 5 6 7


数据表 下载

Go To PDF Page


链接网址




隐私政策
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ] 

关于 Alldatasheet   |   广告服务   |   联系我们   |   隐私政策   |   链接交换   |   制造商名单
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com