数据搜索系统,热门电子元器件搜索 |
|
TS68302VA16 数据表(PDF) 1 Page - ATMEL Corporation |
|
TS68302VA16 数据表(HTML) 1 Page - ATMEL Corporation |
1 / 47 page 1 Features • TS68000/TS68008 Microprocessor Core Supporting a 16- or 8-bit TS68000 Family • System Integration Block Including: – Independent Direct Memory Access (IDMA) Controller – Interrupt Controller with Two Modes of Operation – Parallel Input/output (I/O) Ports, some with Interrupt Capability – On-chip Usable 1152 bytes of Dual-port Random-access Memory (RAM) – Three Timers, including a Watchdog Timer – Four Programmable Chip-select Lines with Wait-state Logic – Programmable Address Mapping of Dual-port RAM and IMP Registers – On-chip Clock Generator with an Output Clock Signal –System Control: System Control Register Bus Arbitration Logic with Low Interrupt Latency Support Hardware Watchdog for Monitoring Bus Activity Low Power (Standby) Modes Disable CPU Logic (TS68000) Freeze Control for Debugging Selected On-chip Peripherals DRAM Refresh Controller • Communications Processor Including: – Main Controller (RISC Processor) – Three Full-duplex Serial Communication Controllers (SCCs) – Six Serial Direct Memory Access (SDMA) Channels Dedicated to the Three SCCs – Flexible Physical Interface Accessible by SCCs for Interchip Digital Link (IDL) General Circuit Interface (GCI, see note), Pulse Code Modulation (PCM), and Nonmultiplexed Serial Interface (NMSI) Operation – Serial Communication Port (SCP) for Synchronous Communication, Clock Rate up to 4.096 MHz – Serial Management Controllers (SMCs) for IDL and GCI Channels • Frequency of Operation: 16.67 MHz • Power Supply: 5 V DC ± 10% Description The IMP is a very large-scale integration (VLSI) device incorporating the main building blocks needed for the design of a wide variety of controllers. The device is especially suitable to applications in the communications industry. The IMP is the first device to offer the benefits of a closely coupled, industry-standard, TS68000/TS68008 micro- processor core and a flexible communications architecture. This multichannel communications device may be configured to support a number of popular industry interfaces, including those for the integrated services digital network (ISDN) basic rate and terminal adapter applications. Through a combination of architectural and pro- grammable features, concurrent operation of different protocols is easily achieved using the IMP. Data concentrators, line cards, bridges, and gateways are examples of suitable applications for this versatile device. The IMP is a high-density complementary metal-oxide semiconductor (HCMOS) device consisting of a TS68000/TS68008 microprocessor core, a system integration block (SIB), and a communications processor (CP). The TS68302 block diagram is shown in Figure 1. Note: GCI is sometimes referred to as IOM2. Integrated Multiprotocol Processor (IMP) TS68302 Rev. 2117A–HIREL–11/02 |
类似零件编号 - TS68302VA16 |
|
类似说明 - TS68302VA16 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |