数据搜索系统,热门电子元器件搜索 |
|
DP83848H 数据表(PDF) 43 Page - Texas Instruments |
|
|
DP83848H 数据表(HTML) 43 Page - Texas Instruments |
43 / 82 page www.national.com 42 7.1.2 Basic Mode Status Register (BMSR) Table 13. Basic Mode Status Register (BMSR), address 0x01 Bit Bit Name Default Description 15 100BASE-T4 0, RO/P 100BASE-T4 Capable: 0 = Device not able to perform 100BASE-T4 mode. 14 100BASE-TX Full Duplex 1, RO/P 100BASE-TX Full Duplex Capable: 1 = Device able to perform 100BASE-TX in full duplex mode. 13 100BASE-TX Half Duplex 1, RO/P 100BASE-TX Half Duplex Capable: 1 = Device able to perform 100BASE-TX in half duplex mode. 12 10BASE-T Full Duplex 1, RO/P 10BASE-T Full Duplex Capable: 1 = Device able to perform 10BASE-T in full duplex mode. 11 10BASE-T Half Duplex 1, RO/P 10BASE-T Half Duplex Capable: 1 = Device able to perform 10BASE-T in half duplex mode. 10:7 RESERVED 0, RO RESERVED: Write as 0, read as 0. 6MF Preamble Suppression 1, RO/P Preamble suppression Capable: 1 = Device able to perform management transaction with preamble suppressed, 32-bits of preamble needed only once after reset, invalid opcode or invalid turnaround. 0 = Normal management operation. 5 Auto-Negotiation Com- plete 0, RO Auto-Negotiation Complete: 1 = Auto-Negotiation process complete. 0 = Auto-Negotiation process not complete. 4 Remote Fault 0, RO/LH Remote Fault: 1 = Remote Fault condition detected (cleared on read or by reset). Fault criteria: Far End Fault Indication or notification from Link Part- ner of Remote Fault. 0 = No remote fault condition detected. 3 Auto-Negotiation Abili- ty 1, RO/P Auto Negotiation Ability: 1 = Device is able to perform Auto-Negotiation. 0 = Device is not able to perform Auto-Negotiation. 2 Link Status 0, RO/LL Link Status: 1 = Valid link established (for either 10 or 100 Mb/s operation). 0 = Link not established. The criteria for link validity is implementation specific. The occurrence of a link failure condition will causes the Link Status bit to clear. Once cleared, this bit may only be set by establishing a good link condition and a read via the management interface. 1 Jabber Detect 0, RO/LH Jabber Detect: This bit only has meaning in 10 Mb/s mode. 1 = Jabber condition detected. 0 = No Jabber. This bit is implemented with a latching function, such that the occur- rence of a jabber condition causes it to set until it is cleared by a read to this register by the management interface or by a reset. 0 Extended Capability 1, RO/P Extended Capability: 1 = Extended register capabilities. 0 = Basic register set capabilities only. |
类似零件编号 - DP83848H |
|
类似说明 - DP83848H |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |