Safety Standard Certified Type KY/KH/KX Specifications and Test Methods
Continued from the preceding page.
1 "C" expresses nominal capacitance value (pF).
2 "Room condition" Temperature: 15 to 35
°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
Cycle time: 5 cycles
Cycle time: 2 cycles
Capacitor should be stored at 85
±2˚C for 1 hr., then placed at
2 for 24
Capacitor should be stored for 24
±2 hrs. at room condition.*2
No marked defect
Per Item 6
The capacitor under test should be held in the flame in the
position that best promotes burning. Each specimen should
only be exposed once to the flame. Time of exposure to flame:
Length of flame : 12
: Length 35mm min.
Outside Dia. 0.9mm max.
: Butane gas Purity 95% min.
The burning time should not exceed 30 sec.
The tissue paper should not ignite.
About 10mm Thick Board
Type KY/KH/KX Specifications and Test Methods
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.