数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  

预览 PDF HTML

DEJE3KH102JA2A Datasheet(数据表) 54 Page - Murata Manufacturing Co., Ltd.

部件型号  DEJE3KH102JA2A
说明  High Voltage Ceramic Capacitors
下载  83 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  MURATA [Murata Manufacturing Co., Ltd.]
网页  http://www.murata.com
标志 

DEJE3KH102JA2A Datasheet(HTML) 54 Page - Murata Manufacturing Co., Ltd.

Zoom Inzoom in Zoom Outzoom out
 54 page
background image
C85E.pdf
Jul.13,2011
DEC Series (Class1, 2 / DC6.3kV) Specifications and Test Methods
No.
Item
Specifications
Test Method
15
Humidity (Under
Steady State)
Appearance
Capacitance
Change
Q
D.F.
No marked defect
Char. SL: Within ±5%
Char. B: Within ±10%
Char. E: Within ±20%
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
Char. B, E: 5.0% max.
I.R.
1000M
Ω min.
Set the capacitor for 500+24/-0 hrs. at 40±2°C in 90 to 95%
relative humidity.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*1
16
Humidity
Loading
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±7.5%
Char. B: Within ±10%
Char. E: Within ±20%
Q
Char. SL:
100+10/3C*2min. (30pF under)
200 min. (30pF min.)
D.F.
Char. B, E: 5.0% max.
I.R.
500M
Ω min.
Apply the rated voltage for 500+24/-0 hrs. at 40±2°C in 90 to
95% relative humidity. (Charge/Discharge current
V50mA.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*1 (Char. SL)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
(Char. B, E)
17
Life
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±3%
Char. B: Within ±10%
Char. E: Within ±20%
Q
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
D.F.
Char. B, E: 4.0% max.
I.R.
2000M
Ω min.
Apply a DC voltage of 150% of the rated voltage for
1000+48/-0 hrs. at 85±2°C with a relative humidity of 50% max.
(Charge/Discharge current
V50mA.)
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*1 (Char. SL)
Post-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
(Char. B, E)
14
Temperature
and Immersion
Cycle
Appearance
No marked defect
Capacitance
Change
Char. SL: Within ±3%
Char. B: Within ±10%
Char. E: Within ±20%
Q
Char. SL: 275+5/2C*2min. (30pF under)
350 min. (30pF min.)
D.F.
Char. B, E: 4.0% max.
I.R.
2000M
Ω min.
Dielectric Strength
(Between Lead
Wires)
Per item 4.
The capacitor should be subjected to 5 temperature cycles,
then consecutively to 2 immersion cycles.
<Temperature Cycle>
Cycle time: 5 cycles
<Immersion Cycle>
Cycle time: 2 cycles
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition.*1
*1 "Room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued from the preceding page.
1
Time (min)
-25±3
30
2
Room Temp.
3
3
85±3
30
4
Room Temp.
3
Step
Temperature (°C)
Time (min)
1
65+5/-0
Clean water
15
2
0±3
Salt water
15
Step
Temperature (°C)
Immersion Water
13
Soldering Effect
(On-Preheat)
Appearance
Capacitance
Change
Dielectric Strength
(Between Lead
Wires)
No marked defect
Char. SL: Within ±2.5%
Char. B: Within ±5%
Char. E: Within ±15%
Per item 4.
First the capacitor should be
stored at 120+0/-5°C for
60+0/-5 sec.
Then, as in the figure, the lead
wires should be immersed in
solder of 260+0/-5°C up to 1.5 to
2.0mm from the root of terminal
for 7.5+0/-1 sec.
Pre-treatment: Capacitor should be stored at 85±2°C for 1 hr.,
then placed at room condition*1 for 24±2 hrs.
before initial measurements. (Char. B, E)
Post-treatment: Capacitor should be stored for 1 to 2 hrs. at
room condition.*1 (Char. SL)
Post-treatment: Capacitor should be stored for 4 to 24 hrs. at
room condition.*1 (Char. B, E)
,,,,,,,,,,
,,,,,,,,,,
,
,
,
,,,
,,,,
,,,,,,
,
,
,
,
,
,
Thermal
Screen
Capacitor
1.5
to 2.0mm
Molten
Solder
DEC Series Specifications and Test Methods
52
10
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering.




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29  30  31  32  33  34  35  36  37  38  39  40  41  42  43  44  45  46  47  48  49  50  51  52  53  54  55  56  57  58  59  60  61  62  63  64  65  66  67  68  69  70  71  72  73  74  75  76  77  78  79  80  81  82  83 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl