数据搜索系统,热门电子元器件搜索 |
|
DE1E3E2102JA2A 数据表(PDF) 33 Page - Murata Manufacturing Co., Ltd. |
|
DE1E3E2102JA2A 数据表(HTML) 33 Page - Murata Manufacturing Co., Ltd. |
33 / 66 page No. Item Specifications Testing Method 15 Humidity (Under Steady State) Appearance Capacitance Change D.F. I.R. No marked defect Within ±10% 0.4% max. 1000M Ω min. Set the capacitor for 500 +24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at *room condition for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at *room condition. 1000M Ω min. 16 Humidity Loading Appearance No marked defect Capacitance Change Within ±10% D.F. I.R. Apply the rated voltage for 500 +24/-0 hrs. at 40±2°C in 90 to 95% relative humidity. (Charge/Discharge current V50mA) Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at *room condition for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 1 to 2 hrs. at *room condition. * "room condition" Temperature: 15 to 35°C, Relative humidity: 45 to 75%, Atmospheric pressure: 86 to 106kPa Continued from the preceding page. 14 Temperature Cycle Appearance No marked defect Capacitance Change Within ±10% D.F. 0.4% max. I.R. 1000M Ω min. Dielectric Strength (Between Lead Wires) Per item 4. The capacitor should be subjected to 5 temperature cycles. <Temperature cycle> Cycle time: 5 cycle Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at *room condition for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 24±2 hrs. at *room condition. 1 Time (min) -25±3 30 2 Room Temp. 3 3 125±3 30 4 Room Temp. 3 Step Temperature (°C) 2000M Ω min. 17 Life Appearance No marked defect Capacitance Change Within ±10% D.F. I.R. Apply a DC voltage of 200% of the rated voltage (DC500V) or DC voltage of 150% of the rated voltage (DC1kV) for 1000 +48/-0 hrs. at 125±2°C with a relative humidity of 50% max. (Charge/Discharge current V 50mA) Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at *room condition for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at *room condition for 24±2 hrs. 0.6% max. 0.4% max. 13 Soldering Effect (On-Preheat) Appearance Capacitance Change Dielectric Strength (Between Lead Wires) No marked defect Within ±10% Per item 4. First the capacitor should be stored at 120+0/-5°C for 60+0/-5 sec. Then, as in figure, the lead wires should be immersed solder of 260+0/-5°C up to 1.5 to 2.0mm from the root of terminal for 7.5+0/-1 sec. Pre-treatment: Capacitor should be stored at 125±3°C for 1 hr., then placed at *room condition for 24±2 hrs. before initial measurements. Post-treatment: Capacitor should be stored for 24±2 hrs. at *room condition. ,,,,,,,,,, ,,,,,,,,,, , , , ,,, ,,,, ,,,,,, , , , , , , Thermal Screen Capacitor 1.5 to 2.0mm Molten Solder DES Series Specifications and Test Methods 32 6 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. • This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. • This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. !Note C85E.pdf 06.6.1 |
类似零件编号 - DE1E3E2102JA2A |
|
类似说明 - DE1E3E2102JA2A |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |