![]() |
数据搜索系统,热门电子元器件搜索 |
|
LM158AJRQMLV 数据表(PDF) 8 Page - Texas Instruments |
|
|
LM158AJRQMLV 数据表(HTML) 8 Page - Texas Instruments |
8 / 30 page ![]() LM158QML SNOSAP3F – JULY 2005 – REVISED MARCH 2013 www.ti.com LM158A Electrical Characteristics SMD 5962–8771003 ELDRS Free Only DC Parameters (continued) The following conditions apply, unless otherwise specified. All voltages referenced to device ground. Sub- Parameter Test Conditions Notes Min Max Units groups ISink Output Sink Current +VCC = 15V, VO = 200mV, 12 µA 1 +VI = 0V, -VI = +65mV +VCC = 15V, VO = 2V, 10 mA 1 +VI = 0V, -VI = +65mV 5.0 mA 2, 3 ISource Output Source Current +VCC = 15V, VO = 2V, -20 mA 1 +VI = 0V, -VI = -65mV -10 mA 2, 3 IOS Short Circuit Current +VCC = 5V, VO = 0V -60 mA 1 VIO Input Offset Voltage +VCC = 30V, VCM = 0V, -2.0 2.0 mV 1 RS = 50Ω, VO = 1.4V -4.0 4.0 mV 2, 3 +VCC = 30V, VCM = 28.5V, -2.0 2.0 mV 1 RS = 50Ω, VO = 1.4V +VCC = 30V, VCM = 28V, -4.0 4.0 mV 2, 3 RS = 50Ω, VO = 1.4V +VCC = 5V, VCM = 0V, -2.0 2.0 mV 1 RS = 50Ω, VO = 1.4V -4.0 4.0 mV 2, 3 CMRR Common Mode Rejection Ratio +VCC = 30V, RS = 50Ω 70 dB 1 VI = 0V to 28.5V, ±IIB Input BIas Current +VCC = 5V, VCM = 0V See(1) -50 -1.0 nA 1 See(1) -100 -1.0 nA 2, 3 IIO Input Offset Current +VCC = 5V, VCM = 0V -10 10 nA 1 -30 30 nA 2, 3 PSRR Power Supply Rejection Ratio +VCC = 5V to 30V, 65 dB 1 VCM = 0V VCM Common Mode Voltage Range +VCC = 30V See(2), (3) 28.5 V 1 See(2), (3) 28.0 V 2, 3 VDiff Differential Input Voltage See(4) 32 V 1, 2, 3 AVS Large Signal Gain +VCC = 15V, RL = 2KΩ, 50 V/mV 4 VO = 1V to 11V 25 V/mV 5, 6 (1) The direction of the input current is out of the IC due to the PNP input stage. This current is essentially constant, independent of the state of the output so no loading change exists on the input lines. (2) The input common-mode voltage of either input signal voltage should not be allowed to go negative by more than 0.3V (at 25°C). The upper end of the common-mode voltage range is V+ −1.5V (at 25°C), but either or both inputs can go to +32V without damage, independent of the magnitude of V+. (3) Specified by input offset voltage. (4) Specified parameter not tested. SMD 5962–8771003 ELDRS Free Only DC Drift Parameters The following conditions apply, unless otherwise specified. All voltages referenced to device ground. Delta calculations are performed on QMLV devices at Group B, Subgroup 5 only. Sub- Parameter Test Conditions Notes Min Max Units groups VIO Input Offset Voltage +VCC = 30V, VCM = 0V, -0.5 0.5 mV 1 RS = 50Ω, VO = 1.4V +VCC = 30V, VCM = 28.5V, -0.5 0.5 mV 1 RS = 50Ω, VO = 1.4V +VCC = 5V, VCM = 0V, -0.5 0.5 mV 1 RS = 50Ω, VO = 1.4V 8 Submit Documentation Feedback Copyright © 2005–2013, Texas Instruments Incorporated Product Folder Links: LM158QML |
类似零件编号 - LM158AJRQMLV |
|
类似说明 - LM158AJRQMLV |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |