LPC2364 datasheet(10/69 Pages) NXP

部件名	LPC2364

功能描述	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC

Download	69 Pages

Scroll/Zoom	100%

制造商	NXP [NXP Semiconductors]

网页	http://www.nxp.com

标志

10 / 69 page

LPC2364_65_66_67_68

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 7.1 — 16 October 2013

10 of 69

NXP Semiconductors

LPC2364/65/66/67/68

Single-chip 16-bit/32-bit microcontrollers

6.2 Pin description

Table 4.

Pin description

Symbol

Ball

Type

Description

P0[0] to P0[31]

I/O

Port 0: Port 0 is a 32-bit I/O port with individual direction controls for each

bit. The operation of Port 0 pins depends upon the pin function selected via

the pin connect block. Pins 12, 13, 14, and 31 of this port are not available.

P0[0]/RD1/TXD3/

SDA1

46[1]

K8[1]

I/O

P0[0] — General purpose digital input/output pin.

I

RD1 — CAN1 receiver input. (LPC2364/66/68 only)

O

TXD3 — Transmitter output for UART3.

I/O

SDA1 — I2C1 data input/output (this is not an open-drain pin).

P0[1]/TD1/RXD3/

SCL1

47[1]

J8[1]

I/O

P0[1] — General purpose digital input/output pin.

O

TD1 — CAN1 transmitter output. (LPC2364/66/68 only)

I

RXD3 — Receiver input for UART3.

I/O

SCL1 — I2C1 clock input/output (this is not an open-drain pin).

P0[2]/TXD0

98[1]

C4[1]

I/O

P0[2] — General purpose digital input/output pin.

O

TXD0 — Transmitter output for UART0.

P0[3]/RXD0

99[1]

A2[1]

I/O

P0[3] — General purpose digital input/output pin.

I

RXD0 — Receiver input for UART0.

P0[4]/

I2SRX_CLK/

RD2/CAP2[0]

81[1]

A8[1]

I/O

P0[4] — General purpose digital input/output pin.

I/O

I2SRX_CLK — Receive Clock. It is driven by the master and received by

the slave. Corresponds to the signal SCK in the I2S-bus specification.

I

RD2 — CAN2 receiver input. (LPC2364/66/68 only)

I

CAP2[0] — Capture input for Timer 2, channel 0.

P0[5]/

I2SRX_WS/

TD2/CAP2[1]

80[1]

D7[1]

I/O

P0[5] — General purpose digital input/output pin.

I/O

I2SRX_WS — Receive Word Select. It is driven by the master and received

by the slave. Corresponds to the signal WS in the I2S-bus specification.

O

TD2 — CAN2 transmitter output. (LPC2364/66/68 only)

I

CAP2[1] — Capture input for Timer 2, channel 1.

P0[6]/

I2SRX_SDA/

SSEL1/MAT2[0]

79[1]

B8[1]

I/O

P0[6] — General purpose digital input/output pin.

I/O

I2SRX_SDA — Receive data. It is driven by the transmitter and read by the

receiver. Corresponds to the signal SD in the I2S-bus specification.

I/O

SSEL1 — Slave Select for SSP1.

O

MAT2[0] — Match output for Timer 2, channel 0.

P0[7]/

I2STX_CLK/

SCK1/MAT2[1]

78[1]

A9[1]

I/O

P0[7] — General purpose digital input/output pin.

I/O

I2STX_CLK — Transmit Clock. It is driven by the master and received by

the slave. Corresponds to the signal SCK in the I2S-bus specification.

I/O

SCK1 — Serial Clock for SSP1.

O

MAT2[1] — Match output for Timer 2, channel 1.

P0[8]/

I2STX_WS/

MISO1/MAT2[2]

77[1]

C8[1]

I/O

P0[8] — General purpose digital input/output pin.

I/O

I2STX_WS — Transmit Word Select. It is driven by the master and

received by the slave. Corresponds to the signal WS in the I2S-bus

specification.

I/O

MISO1 — Master In Slave Out for SSP1.

O

MAT2[2] — Match output for Timer 2, channel 2.

类似零件编号 - LPC2364

制造商	部件名	数据表	功能描述
NXP Semiconductors	LPC2364	1Mb / 48P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 01-22 September 2006
	LPC2364	225Kb / 47P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 02-1 October 2007
	LPC2364	983Kb / 59P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 06-1 February 2010
	LPC2364	4Mb / 12P	NXP Microcontrollers Selection Guide November 2012
	LPC2364	405Kb / 69P	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 7.1-16 October 2013

More results

类似说明 - LPC2364

制造商	部件名	数据表	功能描述
NXP Semiconductors	LPC2365FBD100	405Kb / 69P	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 7.1-16 October 2013
	LPC2364	225Kb / 47P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 02-1 October 2007
	LPC2364	1Mb / 48P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 01-22 September 2006
	LPC2364	983Kb / 59P	Single-chip 16-bit/32-bit microcontrollers; up to 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 06-1 February 2010
	LPC2378	253Kb / 54P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 01-6 December 2006
	LPC2377	351Kb / 69P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 6.1??6 October 2013
	LPC2377	258Kb / 55P	Single-chip 16-bit/32-bit microcontroller; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 04-19 November 2008
	LPC2387	1Mb / 47P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev.01.00-6 November 2007
	LPC2387	226Kb / 47P	Single-chip 16-bit/32-bit microcontrollers; 512 kB flash with ISP/IAP, Ethernet, USB 2.0, CAN, and 10-bit ADC/DAC Rev. 02-1 February 2008
	LPC2141FBD64-S	413Kb / 45P	Single-chip 16-bit/32-bit ocontrollers; up to 512 kB flash with ISP/IAP, USB 2.0 full-speed device, 10-bit ADC and DAC Rev. 5-12 August 2011