ADG729BRU-REEL datasheet(6/13 Pages) AD

部件名	ADG729BRU-REEL

功能描述	CMOS, Low Voltage, 2-Wire Serially Controlled, Matrix Switches

Download	13 Pages

Scroll/Zoom	100%

制造商	AD [Analog Devices]

网页	http://www.analog.com

标志

6 / 13 page

–6–

ADG728/ADG729

ABSOLUTE MAXIMUM RATINGS

1

(TA = 25

°C unless otherwise noted.)

VDD to GND . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 V to +7 V

Analog, Digital Inputs

2

. . . . . . . . . . –0.3 V to VDD + 0.3 V or

30 mA, Whichever Occurs First

Peak Current, S or D . . . . . . . . . . . . . . . . . . . . . . . . . . 100 mA

(Pulsed at 1 ms, 10% Duty Cycle max)

Continuous Current, Each S . . . . . . . . . . . . . . . . . . . . . 30 mA

Continuous Current D, ADG729 . . . . . . . . . . . . . . . . . 80 mA

Continuous Current D, ADG728 . . . . . . . . . . . . . . . . 120 mA

Operating Temperature Range

Industrial (B Version) . . . . . . . . . . . . . . . . –40

°C to +85°C

Storage Temperature Range . . . . . . . . . . . . –65

°C to +150°C

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . 150

°C

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the ADG728/ADG729 features proprietary ESD protection circuitry, permanent damage

may occur on devices subjected to high-energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.

TSSOP Package

θJA Thermal Impedance . . . . . . . . . . . . . . . . . . . 150.4°C/W

θ

JC Thermal Impedance . . . . . . . . . . . . . . . . . . . .

27.6

°C/W

NOTES

1Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those listed in the operational

sections of this speciﬁcation is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability. Only one absolute

maximum rating may be applied at any one time.

2Overvoltages at IN, S or D will be clamped by internal diodes. Current should be

limited to the maximum ratings given.

TERMINOLOGY

CD, CS (ON)

“ON” Switch Capacitance. Measured with refer-

ence to ground.

CIN

Digital Input Capacitance.

tON

Delay time between the 50% and 90% points

of the STOP condition and the switch “ON”

condition.

tOFF

Delay time between the 50% and 90% points

of the STOP condition and the switch “OFF”

condition.

tD

“OFF” time measured between the 80% points of

both switches when switching from one switch to

another.

Charge

A measure of the glitch impulse transferred from

Injection

the digital input to the analog output during

switching.

Off Isolation

A measure of unwanted signal coupling through

an “OFF” switch.

Crosstalk

A measure of unwanted signal which is coupled

through from one channel to another as a result

of parasitic capacitance.

Bandwidth

The frequency at which the output is attenuated

by 3 dBs.

On Response The frequency response of the “ON” switch.

Insertion

The loss due to the ON resistance of the switch.

Loss

WARNING!

ESD SENSITIVE DEVICE

VDD

Most Positive Power Supply Potential.

IDD

Positive Supply Current.

GND

Ground (0 V) Reference.

S

Source Terminal. May be an input or output.

D

Drain Terminal. May be an input or output.

VD (VS)

Analog Voltage on Terminals D, S.

RON

Ohmic Resistance between D and S.

∆RON

On Resistance Match Between any Two Chan-

nels, i.e., RONmax – RONmin.

RFLAT(ON)

Flatness is deﬁned as the difference between the

maximum and minimum value of on resistance

as measured over the speciﬁed analog signal range.

IS (OFF)

Source Leakage Current with the Switch “OFF.”

ID (OFF)

Drain Leakage Current with the Switch “OFF.”

ID, IS (ON)

Channel Leakage Current with the Switch “ON.”

VINL

Maximum Input Voltage for Logic “0.”

VINH

Minimum Input Voltage for Logic “1.”

IINL (IINH)

Input Current of the Digital Input.

CS (OFF)

“OFF” Switch Source Capacitance. Measured

with reference to ground.

CD (OFF)

“OFF” Switch Drain Capacitance. Measured

with reference to ground.

REV. C

Lead Temperature, Soldering . . . . . As per JEDEC J-STD-020

类似零件编号 - ADG729BRU-REEL

制造商	部件名	数据表	功能描述
Analog Devices	ADG729BRU	150Kb / 12P	CMOS, Low-Voltage, 2-Wire Serially-Controlled, Matrix Switches REV. 0

More results

类似说明 - ADG729BRU-REEL

制造商	部件名	数据表	功能描述
Analog Devices	ADG728	150Kb / 12P	CMOS, Low-Voltage, 2-Wire Serially-Controlled, Matrix Switches REV. 0
	ADG738	156Kb / 12P	CMOS, Low-Voltage, 3-Wire Serially-Controlled, Matrix Switches REV. 0
	ADG739BRUZ	352Kb / 20P	CMOS, Low Voltage, 3-Wire Serially-Controlled, Matrix Switches REV. A
	ADG738BRUZ	352Kb / 20P	CMOS, Low Voltage, 3-Wire Serially-Controlled, Matrix Switches REV. A
	ADG739	352Kb / 20P	Serially-Controlled, Matrix Switches REV. A
	ADG738	352Kb / 20P	Serially-Controlled, Matrix Switches REV. A
	ADG714	232Kb / 16P	CMOS, Low Voltage Serially Controlled, Octal SPST Switches REV. B
	ADG714	188Kb / 16P	CMOS, Low Voltage Serially Controlled, Octal SPST Switches REV. C
	ADG714	173Kb / 16P	CMOS, Low Voltage Serially-Controlled, Octal SPST Switches REV. 0
Maxim Integrated Produc...	MAX4584	135Kb / 12P	Serially Controlled Audio/Video Switches Rev 0; 8/99