MKP338 1 X1

www.vishay.com

Vishay BCcomponents

Revision: 18-Jul-13

7

Document Number: 28116

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

Insulation resistance as a function of ambient temperature

APPLICATION NOTES

• For X1 electromagnetics interference suppression in standard across the line applications (50 Hz/60 Hz) with a maximum

• For capacitors connected in parallel, normally the proof voltage and possibly the rated voltage must be reduced. For

• These capacitors are not intended for continuous pulse applications. For these situations, capacitors of the AC and pulse

programs must be used.

• The maximum ambient temperature must not exceed 105 °C.

• Rated voltage pulse slope:



divided by the applied voltage.



INSPECTION REQUIREMENTS

General Notes

Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 60384-14

ed-3 and Specific Reference Data”.

GROUP C INSPECTION REQUIREMENTS

SUB-CLAUSE NUMBER AND TEST

CONDITIONS

PERFORMANCE REQUIREMENTS

SUB-GROUP C1A PART OF SAMPLE OF

SUB-GROUP C1

4.1 Dimensions (detail)

As specified in chapters “General data” of

this specification



Initial measurements

Capacitance

Tangent of loss angle at 10 kHz



4.3 Robustness of terminations

Tensile: Load 10 N; 10 s

Bending: Load 5 N; 4 x 90°



No visible damage

4.4 Resistance to soldering heat

No pre-drying

Method: 1A

Solder bath: 280 °C ± 5 °C

Duration: 10 s

10

6

10

5

10

4

0

20

40

60

80

100