数据搜索系统,热门电子元器件搜索 |
|
DEJ1XKX102JA3B 数据表(PDF) 20 Page - Murata Manufacturing Co., Ltd. |
|
DEJ1XKX102JA3B 数据表(HTML) 20 Page - Murata Manufacturing Co., Ltd. |
20 / 83 page C85E.pdf Jul.13,2011 DEJ Series (Which Meet Japanese Law) Specifications and Test Methods Char. Specifications D.F. V2.5% D.F. V5.0% E F Char. Capacitance Change Within +20 –55% Within +30 –80% E F Step Temperature (ºC) 20 ±2 -25 ±2 20 ±2 85 ±2 20 ±2 1 2 3 4 5 Cd Vs 0.001 µF DC10kV Continued on the following page. The lead wire of a capacitor should be dipped into molten solder for 2 ±0.5 sec. The depth of immersion is up to about 1.5 to 2.0mm from the root of lead wires. Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245 ±5°C H63 Eutectic Solder 235 ±5°C 9 Solderability of Leads Lead wire should be soldered with uniform coating on the axial direction over 3/4 of the circumferential direction. As in Figure 1, discharge is made 50 times at 5 sec. intervals from the capacitor (Cd) charged at DC voltage of specified. Fig.1 Ct: Capacitor under test R2: 100M Ω S: High-voltage switch R3: Surge resistance R1: 1000 Ω 8 Discharge Test Appearance No marked defect I.R. 1000M Ω min. Dielectric Strength Per Item 6 The capacitance measurement should be made at each step specified in Table 1. <Table 1> 7 Temperature Characteristics The capacitor should not be damaged when AC1500V(r.m.s.) are applied between the lead wires for 60 sec. 6 Dielectric Strength Between Lead Wires No failure Body Insulation No failure First, the terminals of the capacitor should be connected together. Then, as shown in the figure at right, the capacitor should be immersed into 10% salt solution up to a position of about 3 to 4mm apart from the terminals. Finally, AC1500V(r.m.s.) is applied for 60 sec. between the capacitor lead wires and electrode plate. The insulation resistance should be measured with DC500 ±50V within 60±5 sec. of charging. 5 Insulation Resistance (I.R.) 10000M Ω min. The dissipation factor should be measured at 20˚C with 1 ±0.1kHz and AC5V(r.m.s.) max. 4 Dissipation Factor (D.F.) The capacitance should be measured at 20˚C with 1 ±0.1kHz and AC5V(r.m.s.) max. 3 Capacitance Within specified tolerance The capacitor should be visually inspected. 2 Marking To be easily legible The capacitor should be visually inspected for evidence of defect. Dimensions should be measured with slide calipers. 1 Appearance and Dimensions No visible defect, and dimensions are within specified range. No. Test Method Specifications Item Operating Temperature Range: -25 to +85 °C Vs R3 R1 R2 S Cd Ct About 3 to 4mm Electrode Plate 10% Salt Solution DEJ Series Specifications and Test Methods 18 5 !Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. • This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. |
类似零件编号 - DEJ1XKX102JA3B |
|
类似说明 - DEJ1XKX102JA3B |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |