数据搜索系统,热门电子元器件搜索 |
|
LM19 数据表(PDF) 4 Page - Texas Instruments |
|
|
LM19 数据表(HTML) 4 Page - Texas Instruments |
4 / 13 page LM19 SNIS122E – MAY 2001 – REVISED MARCH 2013 www.ti.com Electrical Characteristics Unless otherwise noted, these specifications apply for V + = +2.7 V DC. Boldface limits apply for TA = TJ = TMIN to TMAX ; all other limits TA = TJ = 25°C; Unless otherwise noted. Parameter Conditions Typical(1) LM19C Units (Limit) Limits(2) Temperature to Voltage Error TA = +25°C to +30°C ±2.5 °C (max) VO = (−3.88×10 −6×T2) TA = +130°C ±3.5 °C (max) + ( −1.15×10−2×T) + 1.8639V(3) TA = +125°C ±3.5 °C (max) TA = +100°C ±3.2 °C (max) TA = +85°C ±3.1 °C (max) TA = +80°C ±3.0 °C (max) TA = 0°C ±2.9 °C (max) TA = −30°C ±3.3 °C (min) TA = −40°C ±3.5 °C (max) TA = −55°C ±3.8 °C (max) Output Voltage at 0°C +1.8639 V Variance from Curve ±1.0 °C Non-Linearity(4) −20°C ≤ TA ≤ +80°C ±0.4 % Sensor Gain (Temperature Sensitivity −30°C ≤ TA ≤ +100°C −11.77 −11.0 mV/°C (min) or Average Slope) to equation: −12.6 mV/°C (max) VO=−11.77 mV/°C×T+1.860V Output Impedance 0 μA ≤ IL ≤ +16 μA (5) (6) 160 Ω (max) Load Regulation(7) 0 μA ≤ IL ≤ +16 μA (5) (6) −2.5 mV (max) Line Regulation(8) +2. 4 V ≤ V+ ≤ +5.0V +3.7 mV/V (max) +5.0 V ≤ V+ ≤ +5.5 V +11 mV (max) Quiescent Current +2. 4 V ≤ V+ ≤ +5.0V 4.5 7 μA (max) +5.0V ≤ V+ ≤ +5.5V 4.5 9 μA (max) +2. 4 V ≤ V+ ≤ +5.0V 4.5 10 μA (max) Change of Quiescent Current +2. 4 V ≤ V+ ≤ +5.5V +0.7 μA Temperature Coefficient of Quiescent −11 nA/°C Current Shutdown Current V+ ≤ +0.8 V 0.02 μA (1) Typicals are at TJ = TA = 25°C and represent most likely parametric norm. (2) Limits are ensured to AOQL (Average Outgoing Quality Level). (3) Accuracy is defined as the error between the measured and calculated output voltage at the specified conditions of voltage, current, and temperature (expressed in°C). (4) Non-Linearity is defined as the deviation of the calculated output-voltage-versus-temperature curve from the best-fit straight line, over the temperature range specified. (5) Negative currents are flowing into the LM19. Positive currents are flowing out of the LM19. Using this convention the LM19 can at most sink −1 μA and source +16 μA. (6) Load regulation or output impedance specifications apply over the supply voltage range of +2.4V to +5.5V. (7) Regulation is measured at constant junction temperature, using pulse testing with a low duty cycle. Changes in output due to heating effects can be computed by multiplying the internal dissipation by the thermal resistance. (8) Line regulation is calculated by subtracting the output voltage at the highest supply input voltage from the output voltage at the lowest supply input voltage. 4 Submit Documentation Feedback Copyright © 2001–2013, Texas Instruments Incorporated Product Folder Links: LM19 |
类似零件编号 - LM19 |
|
类似说明 - LM19 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |