数据搜索系统,热门电子元器件搜索 |
|
BA00DD0WFPV5 数据表(PDF) 8 Page - Rohm |
|
BA00DD0WFPV5 数据表(HTML) 8 Page - Rohm |
8 / 20 page 8/22 Datasheet Datasheet BD60A00NUX BD60A60NUX © 2012 ROHM Co., Ltd. All rights reserved. www.rohm.com TSZ22111・15・001 TSZ02201-0G3G0C200320-1-2 27.SEP.2012 Rev.001 ●Protection ・ Over voltage protection At such an error of output open as the output DC/DC and the LED is not connected to IC, the DC/DC boosts too much and the VOUT terminal exceeds the absolute maximum ratings, and may destruct the IC. Therefore, when the VOUT becomes sensing voltage or higher, the over voltage limit protection works, turns off the switching Tr, DC/DC will be stopped, and the output voltage goes down slowly. When output voltage becomes below the hysteresis voltage of Over voltage protection, A boost function works and output voltage reaches detection voltage again. This operation is repeated unless the abnormalities in application are recovered. ・ Schottky Diode open protection In the case of external SBD is not connected to IC, or VOUT is shorted to GND, the coil or internal Tr may be destructed. Therefore, at such an error as VOUT becoming 0.2V or below, turns off the output Tr, and prevents the coil and the IC from being destructed. And the IC changes from activation into non-activation, and current does not flow to the coil (0mA). ・ Thermal shut down This IC has thermal shut down function. The thermal shut down works at 175˚C or higher, and the IC changes from activation into non-activation. ・ Over Current Protection Over current flows the current detection resistor that is connected to between internal switching transistor source and GND. Current sense voltage turns more than detection voltage, over current protection is operating and it is prevented from flowing more than detection current by reducing ON duty of switching Tr without stopping boost. As over current detector of This IC is detected peak current, current more than over current setting value does not flow. < The estimate of the current value which need for the normal operation> As over current detector of This IC is detected the peak current, it has to estimate peak current to flow to the coil by operating condition. In case of, ○ Switching frequency = fsw Typ.=0.6MHz ○ Supply voltage of coil = VIN ○ Inductance value of coil = L ○ Output voltage = VOUT ○ Total LED current = IOUT ○ Average current of coil = Iave ○ Peak current of coil = Ipeak ○ Efficiency = eff ○ ON time of switching transistor = Ton Ipeak = (VIN / L) × (1 / fsw) × (1-(VIN / VOUT)) Iave=(VOUT × IOUT / VIN) / eff Ton=(Iave × (1-VIN/VOUT) × (1/fsw) × (L/VIN) × 2) 1/2 As peak current varies according to whether there is the direct current superposed, the next is decided. (1-VIN/VOUT) × (1/fsw) < Ton peak current = Ipeak /2 + Iave (continuous mode CCM) (1-VIN/VOUT) × (1/fsw) > Ton peak current = (VIN / L)×Ton (discontinuous mode DCM) (Example 1) In case of, VIN=6.0V, L=10µH, fsw=0.6MHz, VOUT=32.5V, IOUT=25mA, current =85% Ipeak = (6.0V / 10µH) × (1 / 0.6MHz) × (1-(6.0V / 32.5V)) =0.82 A Iave = (32.5V × 25mA / 6.0V) / 85% = 0.16A Ton = (0.16A × (1-6.0V / 32.5V) × (1 / 0.75MHz) × (10µH /6.0V) × 2) 1/2 = 0.85µs (1-VIN/VOUT) × (1/fsw)=1.36µs > Ton peak current = (6.0V / 10µH)×0.85µs =0.51A + - SW |
类似零件编号 - BA00DD0WFPV5 |
|
类似说明 - BA00DD0WFPV5 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |