数据搜索系统,热门电子元器件搜索 |
|
LC872G08A 数据表(PDF) 2 Page - Sanyo Semicon Device |
|
LC872G08A 数据表(HTML) 2 Page - Sanyo Semicon Device |
2 / 27 page LC872G08A/06A/04A No.A1400-2/27 Minimum Bus Cycle • 83.3ns (12MHz at VDD=2.7V to 5.5V) • 100ns (10MHz at VDD=2.2V to 5.5V) • 250ns (4MHz at VDD=1.8V to 5.5V) Note: The bus cycle time here refers to the ROM read speed. Minimum Instruction Cycle Time • 250ns (12MHz at VDD=2.7V to 5.5V) • 300ns (10MHz at VDD=2.2V to 5.5V) • 750ns (4MHz at VDD=1.8V to 5.5V) Ports • Normal withstand voltage I/O ports Ports I/O direction can be designated in 1-bit units 11 (P1n, P20, P21, P70) Ports I/O direction can be designated in 4-bit units 8 (P0n) • Dedicated oscillator ports/input ports 2 (CF1/XT1, CF2/XT2) • Reset pin 1 (RES) • Power pins 2 (VSS1, VDD1) Timers • Timer 0: 16-bit timer/counter with a capture register. Mode 0: 8-bit timer with an 8-bit programmable prescaler (with an 8-bit capture register) × 2 channels Mode 1: 8-bit timer with an 8-bit programmable prescaler (with an 8-bit capture register) + 8-bit counter (with an 8-bit capture register) Mode 2: 16-bit timer with an 8-bit programmable prescaler (with a 16-bit capture register) Mode 3: 16-bit counter (with a 16-bit capture register) • Timer 1: 16-bit timer/counter that supports PWM/toggle outputs Mode 0: 8-bit timer with an 8-bit prescaler (with toggle outputs) + 8-bit timer/ counter with an 8-bit prescaler (with toggle outputs) Mode 1: 8-bit PWM with an 8-bit prescaler × 2 channels Mode 2: 16-bit timer/counter with an 8-bit prescaler (with toggle outputs) (toggle outputs also possible from the lower-order 8 bits) Mode 3: 16-bit timer with an 8-bit prescaler (with toggle outputs) (The lower-order 8 bits can be used as PWM) • Timer 6: 8-bit timer with a 6-bit prescaler (with toggle outputs) • Timer 7: 8-bit timer with a 6-bit prescaler (with toggle outputs) • Base timer 1) The clock is selectable from the subclock (32.768kHz crystal oscillation), system clock, and timer 0 prescaler output. 2) Interrupts are programmable in 5 different time schemes High-Speed Clock Counter • Can count clocks with a maximum clock rate of 20MHz (at a main clock of 10MHz). • Can generate output real time. SIO • SIO0: 8-bit Synchronous serial interface 1) LSB first/MSB first mode selectable 2) Built-in 8-bit baudrate generator (maximum transfer clock cycle=4/3tCYC) • SIO1: 8-bit asynchronous/synchronous serial interface Mode 0: Synchronous 8-bit serial I/O (2- or 3-wire configuration, 2 to 512 tCYC transfer clocks) Mode 1: Asynchronous serial I/O (half-duplex, 8 data bits, 1 stop bit, 8 to 2048 tCYC baudrates) Mode 2: Bus mode 1 (start bit, 8 data bits, 2 to 512 tCYC transfer clocks) Mode 3: Bus mode 2 (start detect, 8 data bits, stop detect) |
类似零件编号 - LC872G08A |
|
类似说明 - LC872G08A |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |