数据搜索系统,热门电子元器件搜索 |
|
LC88F40H0PA 数据表(PDF) 6 Page - Sanyo Semicon Device |
|
LC88F40H0PA 数据表(HTML) 6 Page - Sanyo Semicon Device |
6 / 32 page LC88F40H0PA/H0PAU/F0PA/F0PAU/D0PA/D0PAU No.A1853-6/32 ■Standby Function • HALT mode: Halts instruction execution while allowing the peripheral circuits to continue operation. 1) Both the XT oscillator and internal RC oscillator retain the state established when the standby mode is entered. 2) Both the XT and VCO clocks retain the state established when the standby mode is entered. 3) There are the two ways of releasing the HALT mode. (1) Generating a reset condition (2) Generating an interrupt • HOLD mode: Suspends instruction execution and the operation of the peripheral circuits. 1) Both the XT oscillator and internal RC oscillator automatically stop operation. 2) XT clock and VCO clock oscillators automatically stop. 3) There are the six ways of releasing the HOLD mode. (1) Generating a reset condition (2) Setting at least one of the INT0, INT1, INT2, INT4, INT5, INT6, and INT7 pins to the specified level (3) Having an interrupt source established at port 0 (4) Having an interrupt source established at port 5 (5) Having an interrupt request generated in UART2, UART3, UART4, or UART5 (6) Having an interrupt request generated in SIO0 or SIO1 • HOLDX mode: Suspends instruction execution and operation of all the peripheral circuits except the modules run on the XT clock. 1) The internal RC oscillator automatically stops operation. 2) The XT clock retains the state established when the HOLDX mode is entered and the VCO clock automatically stops. 3) There are nine ways of resetting the HOLDX mode. (1) Generating a reset condition (2) Setting at least one of the INT0, INT1, INT2, INT4, INT5, INT6, and INT7 pins to the specified level (3) Having an interrupt source established at port 0 (4) Having an interrupt source established at port 5 (5) Having an interrupt request generated in UART2, UART3, UART4, or UART5 (6) Having an interrupt request generated in SIO0 or SIO1 (7) Having an interrupt source established in the timer 8 circuit (8) Having an interrupt source established in the infrared remote controller receive circuit (9) Having an interrupt source established in the clock timer circuit ■Reset • External reset • Voltage drop detection type of reset circuit (VDET circuit) incorporated 1) Normal mode detection voltage: 2.85V ±0.15V 2) HOLD mode detection voltage: 1.42V ±0.15V ■On-chip debugger function • Supports software debugging with the IC mounted on the target board. • Supports source line debugging and tracing functions, and breakpoint setting and real time monitor. • Single-wire communication ■Shipping Form • QIP100E (Lead free product) |
类似零件编号 - LC88F40H0PA |
|
类似说明 - LC88F40H0PA |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |