数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  

预览 PDF Download HTML

DRV8302DCAR Datasheet(数据表) 14 Page - Texas Instruments

Click here to check the latest version.
部件型号  DRV8302DCAR
说明  Three Phase Pre-Driver with Dual Current Shunt Amplifiers and Buck Regulator Hardware Controlled
下载  21 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  TI1 [Texas Instruments]
网页  http://www.ti.com
标志 

DRV8302DCAR Datasheet(HTML) 14 Page - Texas Instruments

Zoom Inzoom in Zoom Outzoom out
 14 page
background image
R1
R2
VOC
DVDD
OC_ADJ
DRV8302
SLES267
– AUGUST 2011
www.ti.com
R1 + R2
≥ 100 KΩ
DVDD = 3.3 V
Connect OC_ADJ pin to DVDD to disable the over-current protection feature.
Figure 3. OC_ADJ Current Programming Pin Connection
Under-Voltage Protection (UVP)
To protect the power output stage during startup, shutdown and other possible under-voltage conditions, the
DRV8302 provides power stage under-voltage protection by driving its outputs low whenever PVDD is below 6V
(PVDD_UV) or GVDD is below 8V (GVDD_UV). When UVP is triggered, the DRV8302 outputs are driven low
and the external MOSFETs will go to a high impedance state.
Over-Voltage Protection (GVDD_OV)
Device will shut down both gate driver and charge pump if GVDD voltage exceeds 16V to prevent potential issue
related to GVDD or charge pump (e.g. short of external GVDD cap or charge pump). The fault is a latched fault
and can only be reset through a transition on EN_GATE pin.
Over-Temperature Protection
A two-level over-temperature detection circuit is implemented:
Level 1: over temperature warning (OTW)
OTW is reported through OCTW pin.
Level 2: over temperature (OT) latched shut down of gate driver and charge pump (OTSD_GATE)
Fault will be reported to FAULT pin. This is a latched shut down, so gate driver will not be recovered
automatically even if OT condition is not present anymore. An EN_GATE reset through pin is required to
recover gate driver to normal operation after temperature goes below a preset value, tOTSD_CLR.
Fault and Protection Handling
The FAULT pin indicates an error event with shut down has occurred such as over-current, over-temperature,
over-voltage, or under-voltage. Note that FAULT is an open-drain signal. FAULT will go high when gate driver is
ready for PWM signal (internal EN_GATE goes high) during start up.
The OCTW pin indicates an over temperature or over current event that is not necessarily related to shut down.
Following is the summary of all protection features and their reporting structure:
14
Submit Documentation Feedback
Copyright
© 2011, Texas Instruments Incorporated
Product Folder Link(s): DRV8302




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl