数据搜索系统,热门电子元器件搜索 |
|
ADP8866 数据表(PDF) 1 Page - Analog Devices |
|
ADP8866 数据表(HTML) 1 Page - Analog Devices |
1 / 2 page Charge Pump Driven 9-Channel LED Driver with Automated LED Lighting Effects Preliminary Technical Data ADP8866 Rev. PrA Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibilityisassumedbyAnalogDevicesforitsuse,norforanyinfringementsofpatentsorother rightsofthirdpartiesthatmayresultfromitsuse.Specificationssubjecttochangewithoutnotice.No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarksandregisteredtrademarksarethepropertyoftheirrespectiveowners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 ©2010 Analog Devices, Inc. All rights reserved. FEATURES Charge pump with automatic gain selection of 1×, 1.5×, and 2× for maximum efficiency. 92% peak efficiency 9 independent and programmable LED drivers Each driver capable of 25 mA (full scale) Each driver has 7 bits (128 levels) of non-linear current settings Standby mode for <1 µA current consumption 16 programmable fade in and fade out times (0.0 sec to 1.75 sec) with choice of square or cubic rates Automated and customizable LED blinking for all 9 channels. Unique heartbeat mode for customizable double pulse lighting effects PWM input for implementing content adjustable brightness control (CABC) I2C compatible interface for all programming Dedicated reset pin and built-in power on reset (POR) Short circuit, overvoltage, and overtemperature protection Internal soft start to limit inrush currents Input to output isolation during faults or shutdown Operates down to V IN = 2.5 V, with undervoltage lockout (UVLO) at 2.0 V Small lead frame chip scale package (LFCSP) APPLICATIONS Mobile display backlighting Mobile phone keypad backlighting LED indication and status lights Automated LED blinking TYPICAL OPERATING CIRCUIT Figure 1. GENERAL DESCRIPTION The ADP8866 combines a programmable backlight LED charge pump driver with automatic blinking functions. Nine LED drivers can be independently programmed at currents up to 25 mA. The current level, fade time, and blinking rate can be programmed once and executed autonomously on a loop. Separate fade in and out times can be set for the backlight LEDs. Driving all of this is a two capacitor charge pump with gains of 1×, 1.5×, and 2×. This setup is capable of driving a maximum IOUT of 240 mA from a supply of 2.5 V to 5.5 V. A full suite of safety features including short-circuit, overvoltage, and over- temperature protection allow easy implementation of a safe and robust design. Additionally, input inrush currents are limited via an integrated soft start combined with controlled input to output isolation. |
类似零件编号 - ADP8866 |
|
类似说明 - ADP8866 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |