数据搜索系统,热门电子元器件搜索 |
|
TS2431BCTB0 数据表(PDF) 2 Page - Taiwan Semiconductor Company, Ltd |
|
TS2431BCTB0 数据表(HTML) 2 Page - Taiwan Semiconductor Company, Ltd |
2 / 13 page TS2431 Adjustable Precision Shunt Regulator 2/13 Version: E07 Recommend Operating Condition Parameter Symbol Limit Unit Cathode Voltage (Note 1) VKA Ref ~ 36 V Continuous Cathode Current Range IK 1 ~ 100 mA Recommend Operating Condition Parameter Symbol Test Conditions Min Typ Max Unit TS2431 2.450 2.550 TS2431A 2.475 2.525 Reference voltage TS2431B VREF VKA =VREF, IK =10mA (Figure 1) Ta=25 oC 2.487 2.495 2.513 V Deviation of reference input voltage ∆ VREF VKA = VREF, IK =10mA (Figure 1) Ta= full range -- 3 12 mV Radio of change in Vref to change in cathode Voltage ∆VREF /∆VKA IKA =10mA, VKA = 10V to VREF VKA = 36V to 10V (Figure 2) -- -- -1.4 -1.0 -2.7 -2.0 mV/V Reference Input current IREF R1=10KΩ, R2= ∞ , IKA =10mA Ta= full range (Figure 2) -- 0.7 4.0 uA Deviation of reference input current, over temp. ∆IREF R1=10KΩ, R2= ∞ , IKA =10mA Ta= full range (Figure 2) -- 0.4 1.2 uA Off-state Cathode Current IKA (off) VREF =0V (Figure 3), VKA =36V -- -- 1.0 uA Dynamic Output Impedance | ZKA | f<1KHz, VKA = VREF IKA =1mA to 100mA (Figure 1) -- 0.22 0.5 Ω Minimum operating cathode current IKA (min) VKA = VREF (Figure 1) -- 0.4 0.6 mA * The deviation parameters ∆VREF and ∆IREF are defined as difference between the maximum value and minimum value obtained over the full operating ambient temperature range that applied. * The average temperature coefficient of the reference input voltage, αVREF is defined as: Where: T2-T1 = full temperature change. ∆VREF can be positive or negative depending on whether the slope is positive or negative. Example: Maximum VREF=2.496V at 30 oC, minimum VREF =2.492V at 0oC, VREF =2.495V at 25oC, ∆T=70oC ∆VREF | = [4mV / 2495mV] * 10 6 / 70oC ≈ 23ppm/oC Because minimum VREF occurs at the lower temperature, the coefficient is positive. * The dynamic impedance ZKA is defined as: | ZKA | = ∆VKA / ∆IKA * When the device operating with two external resistors, R1 and R2, (refer to Figure 2) the total dynamic impedance of the circuit is given by: | ZKA | = ∆v / ∆i | ≈ ZKA | * ( 1 + R1 / R2) |
类似零件编号 - TS2431BCTB0 |
|
类似说明 - TS2431BCTB0 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |