数据搜索系统,热门电子元器件搜索 |
|
FM24V10 数据表(PDF) 11 Page - Ramtron International Corporation |
|
FM24V10 数据表(HTML) 11 Page - Ramtron International Corporation |
11 / 15 page FM24V10 - 1Mb I2C FRAM Rev. 1.1 Feb. 2009 Page 11 of 15 Electrical Specifications Absolute Maximum Ratings Symbol Description Ratings VDD Power Supply Voltage with respect to VSS -1.0V to +4.5V VIN Voltage on any pin with respect to VSS -1.0V to +4.5V and VIN < VDD+1.0V * TSTG Storage Temperature -55 °C to +125°C TLEAD Lead Temperature (Soldering, 10 seconds) 300 ° C VESD Electrostatic Discharge Voltage - Human Body Model (JEDEC Std JESD22-A114-B) - Charged Device Model (JEDEC Std JESD22-C101-A) - Machine Model (JEDEC Std JESD22-A115-A) TBD TBD TBD Package Moisture Sensitivity Level MSL-1 * Exception: The “VIN < VDD+1.0V” restriction does not apply to the SCL and SDA inputs. Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only, and the functional operation of the device at these or any other conditions above those listed in the operational section of this specification is not implied. Exposure to absolute maximum ratings conditions for extended periods may affect device reliability. DC Operating Conditions (TA = -40° C to + 85° C, VDD =2.0V to 3.6V unless otherwise specified) Symbol Parameter Min Typ Max Units Notes VDD Main Power Supply 2.0 - 3.6 V IDD VDD Supply Current @ SCL = 100 kHz @ SCL = 1 MHz @ SCL = 3.4 MHz 175 400 1000 µA µA µA 1 ISB Standby Current 90 150 µA 2 IZZ Sleep Mode Current 5 8 µA 2 ILI Input Leakage Current ±1 µA 3 ILO Output Leakage Current ±1 µA 3 VIL Input Low Voltage -0.3 0.3 VDD V VIH Input High Voltage 0.7 VDD VDD + 0.3 V VOL1 Output Low Voltage (IOL = 2 mA, VDD ≥ 2.7V) 0.4 V VOL2 Output Low Voltage (IOL = 150 µA) 0.2 V RIN Address Input Resistance (WP, A2-A1) For VIN = VIL (max) For VIN = VIH (min) 50 1 K Ω M Ω 5 VHYS Input Hysteresis 0.05 VDD V 4 Notes 1. SCL toggling between VDD-0.2V and VSS, other inputs VSS or VDD-0.2V. 2. SCL = SDA = VDD. All inputs VSS or VDD. Stop command issued. 3. VIN or VOUT = VSS to VDD. Does not apply to WP, A2-A1 pins. 4. This parameter is characterized but not tested. 5. The input pull-down circuit is stronger (50K Ω) when the input voltage is below VIL and weak (1MΩ) when the input voltage is above VIH. |
类似零件编号 - FM24V10 |
|
类似说明 - FM24V10 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |