数据搜索系统,热门电子元器件搜索 |
|
LF111EDI 数据表(PDF) 2 Page - MicroPower Direct, LLC |
|
LF111EDI 数据表(HTML) 2 Page - MicroPower Direct, LLC |
2 / 2 page Model Selection Guide Mechanical Dimensions Notes: • All dimensions are typical in inches (mm) • Tolerance x.xx = ±0.01 (±0.25) • Pin 1 is marked by a “dot” or indentation on the unit Board Layout Pin Connections Pin Description Pin Description 1-Vin 7 NC 2 +Vin 8 +Vout 3NC 10 NC 5 Common 11 NC 6 -Vout 12 NC NC = No Connection MicroPower Direct www.micropowerdirect.com 292 Page Street Ste D Stoughton, MA 02072 • TEL: (781) 344-8226 • FAX: (781) 344-8481 • E-Mail: sales@micropowerdirect.com Recommended Solder Profile Derating Curve Notes: 1. Output load regulation is specified for a load change of 10% to 100%. 2. When measuring output ripple, it is recommended that an external 0.33 µF ceramic capacitor be placed from the +Vout pin to the -Vout pin for single output units and from each output to common for dual output units. 3. During operation, care must be taken not to exceed the specified input range of the unit or to allow the output load to drop below the specified minimum (10% of full load). Operating the unit under either of these conditions could cause damage to the unit. 4. These converters are specified for operation without external components. However, in some applications the addition of input/output capacitors will enhance stability and reduce output ripple. Recommended capacitor values are: Vin Input Capacitor Vout Output Capacitor 3.3 VDC 10.0 µF 5 VDC 4.7 µF 5 VDC 4.7 µF 9 VDC 2.2 µF 12 VDC 2.2 µF 12 VDC 1.0 µF 15 VDC 0.47 µF For applications requiring very low output noise levels, a simple LC filter should be effective. 5. It is recommended that a fuse be used on the input of a power supply for protection. See the Model Selection table above for the correct rating. Model Number Input Output Load Regulation (%, Max) Efficiency (%, Typ) Fuse Rating Slow-Blow (mA) Voltage (VDC) Current (mA) Voltage (VDC) Current (mA, Max) Current (mA, Min) Nominal Range Full-Load No-Load LF101EDI 5 4.5 - 5.5 294 30 ±5.0 ±100.0 ±10.0 12.0 68 500 LF102EDI 5 4.5 - 5.5 277 30 ±9.0 ±56.0 ±6.0 8.0 72 500 LF103EDI 5 4.5 - 5.5 270 30 ±12.0 ±42.0 ±5.0 8.5 74 500 LF104EDI 5 4.5 - 5.5 270 30 ±15.0 ±33.0 ±4.0 7.0 74 500 LF111EDI 12 10.8 - 13.2 121 15 ±5.0 ±100.0 ±10.0 12.0 69 200 LF112EDI 12 10.8 - 13.2 116 15 ±9.0 ±56.0 ±6.0 8.0 72 200 LF113EDI 12 10.8 - 13.2 113 15 ±12.0 ±42.0 ±5.0 8.5 74 200 LF114EDI 12 10.8 - 13.2 113 15 ±15.0 ±33.0 ±4.0 7.0 75 200 LF151EDI 3.3 3.0 - 3.6 452 55 ±5.0 ±100.0 ±10.0 12.0 67 750 LF152EDI 3.3 3.0 - 3.6 445 55 ±12.0 ±42.0 ±5.0 8.5 68 750 LF153EDI 3.3 3.0 - 3.6 432 55 ±15.0 ±33.0 ±4.0 7.0 70 750 |
类似零件编号 - LF111EDI |
|
类似说明 - LF111EDI |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |