数据搜索系统,热门电子元器件搜索 |
|
EPM240F100I 数据表(PDF) 49 Page - Altera Corporation |
|
EPM240F100I 数据表(HTML) 49 Page - Altera Corporation |
49 / 86 page Chapter 3: JTAG and In-System Programmability 3–7 Referenced Documents © October 2008 Altera Corporation MAX II Device Handbook Real-Time ISP For systems that require more than DC logic level control of I/O pins, the real-time ISP feature allows you to update the CFM block with a new design image while the current design continues to operate in the SRAM logic array and I/O pins. A new programming file is updated into the MAX II device without halting the original design’s operation, saving down-time costs for remote or field upgrades. The updated CFM block configures the new design into the SRAM upon the next power cycle. It is also possible to execute an immediate configuration of the SRAM without a power cycle by using a specific sequence of ISP commands. The configuration of SRAM without a power cycle takes a specific amount of time (tCONFIG). During this time, the I/O pins are tri-stated and weakly pulled-up to VCCIO. Design Security All MAX II devices contain a programmable security bit that controls access to the data programmed into the CFM block. When this bit is programmed, design programming information, stored in the CFM block, cannot be copied or retrieved. This feature provides a high level of design security because programmed data within flash memory cells is invisible. The security bit that controls this function, as well as all other programmed data, is reset only when the device is erased. The SRAM is also invisible and cannot be accessed regardless of the security bit setting. The UFM block data is not protected by the security bit and is accessible through JTAG or logic array connections. Programming with External Hardware MAX II devices can be programmed by downloading the information via in-circuit testers, embedded processors, the Altera® ByteblasterMV™, MasterBlaster™, ByteBlaster™ II, and USB-Blaster cables. BP Microsystems, System General, and other programming hardware manufacturers provide programming support for Altera devices. Check their websites for device support information. Referenced Documents This chapter references the following documents: ■ DC and Switching Characteristics chapter in the MAX II Device Handbook ■ IEEE 1149.1 (JTAG) Boundary-Scan Testing for MAX II Devices chapter in the MAX II Device Handbook ■ Real-Time ISP and ISP Clamp for MAX II Devices chapter in the MAX II Device Handbook ■ Using Jam STAPL for ISP via an Embedded Processor chapter in the MAX II Device Handbook |
类似零件编号 - EPM240F100I |
|
类似说明 - EPM240F100I |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |