 |
数据搜索系统，热门电子元器件搜索 |
|
|
数据搜索系统，热门电子元器件搜索 |
|
EPM240F100I 数据表(PDF) 46 Page - Altera Corporation |
|
||||||||||||||||||||||||||||||
EPM240F100I 数据表(HTML) 46 Page - Altera Corporation |
|
|
46 / 86 page  3–4 Chapter 3: JTAG and In-System Programmability In System Programmability MAX II Device Handbook © October 2008 Altera Corporation In System Programmability MAX II devices can be programmed in-system via the industry standard 4-pin IEEE Std. 1149.1 (JTAG) interface. In-system programmability (ISP) offers quick, efficient iterations during design development and debugging cycles. The logic, circuitry, and interconnects in the MAX II architecture are configured with flash-based SRAM configuration elements. These SRAM elements require configuration data to be loaded each time the device is powered. The process of loading the SRAM data is called configuration. The on-chip configuration flash memory (CFM) block stores the SRAM element’s configuration data. The CFM block stores the design’s configuration pattern in a reprogrammable flash array. During ISP, the MAX II JTAG and ISP circuitry programs the design pattern into the CFM block’s non-volatile flash array. The MAX II JTAG and ISP controller internally generate the high programming voltages required to program the CFM cells, allowing in-system programming with any of the recommended operating external voltage supplies (that is, 3.3 V/2.5 V or 1.8 V for the MAX IIG and MAX IIZ devices). ISP can be performed anytime after VCCINT and all VCCIO banks have been fully powered and the device has completed the configuration power-up time. By default, during in-system programming, the I/O pins are tri-stated and weakly pulled-up to VCCIO to eliminate board conflicts. The in- system programming clamp and real-time ISP feature allow user control of I/O state or behavior during ISP. For more information, refer to “In-System Programming Clamp” on page 3–6 and “Real-Time ISP” on page 3–7. These devices also offer an ISP_DONE bit that provides safe operation when in- system programming is interrupted. This ISP_DONE bit, which is the last bit programmed, prevents all I/O pins from driving until the bit is programmed. Figure 3–1. MAX II Parallel Flash Loader Notes to Figure 3–1: (1) This block is implemented in LEs. (2) This function is supported in the Quartus II software. Parallel Flash Loader Configuration Logic Flash Memory Device MAX II Device DQ[7..0] RY/BY A[20..0] OE WE CE DQ[7..0] RY/BY A[20..0] OE WE CE TDI TMS TCK TDI_U TDO_U TMS_U TCK_U SHIFT_U CLKDR_U UPDATE_U RUNIDLE_U USER1_U TDO Altera FPGA CONF_DONE nSTATUS nCE DCLK DATA0 nCONFIG (1), (2) |
类似零件编号 - EPM240F100I |
|
类似说明 - EPM240F100I |
|
|
链接网址 |
| 隐私政策 |
| ALLDATASHEETCN.COM |
| ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Chinese ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
