GAMEWELL-FCI

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.

©2007 Honeywell International Inc. All rights reserved.

www.gamewell-fci.com

CS-2492 Rev. A page 1 of 3

600 Series

IdentiFlex 632

with SmartScan™

Analog Addressable Control Panel

Description

The IdentiFlex 632 (IF632) with SmartScan™ is a full-fea-

tured Fire Alarm Control Panel (FACP) to monitor and con-

trol both analog intelligent addressable devices and

conventional hard-wired zones, providing maximum appli-

cation flexibility. It is easily adapted to a new or retrofit

installation which calls for modular flexibility and perfor-

mance, providing up to 1584 analog addressable points.

With the addition of SmartLink™, the IdentiFlex 632 appli-

cation can network multiple IF632s or other 600 Series fire

alarm panels. The interactive operator’s display uses LED

prompting for easy user operation and programming. The

alphanumeric display and keypad simplify field program-

ming. A PC with Gamewell-FCI’s SmartProgram II can be

used to program the IF632.

The IdentiFlex 632 offers all the features of today’s most

advanced life safety systems. Integration of analog and

hard-wired circuits allows the system engineer to custom-

ize the control panel based on the application. The CPU

automatically senses system configuration to ensure that

modules are correctly positioned to speed installation and

maintenance.

IdentiFlex 632 software allows the system to be custom-

ized to specific applications, such as cross-zoning and

alarm verification.

Front-panel construction is designed to allow routine main-

tenance of the system without disturbing the I/O modules.

Multiple levels of password protection prevent unautho-

rized use. The cabinet is designed with terminal strips for

ease of installation and service.

Operator’s Display

The IdentiFlex 632 operator’s display has all the necessary

keys and annunciation points to maintain and monitor the

system. Alarm, Supervisory and Trouble conditions are all

indicated on the operator’s display by dedicated LEDs and

the internal sounder. The Acknowledge, Reset, and Signal

Silence keys are easily found on the display.

SmartScan™ and SmartLink™ are trademarks of Honeywell International Inc.

Features

•

Analog/addressable and conventional input circuits.

•

SmartScan™ protocol up to 99 detectors and 99

devices per loop.

•

SmartStart™ self-programming logic.

•

Fully modular.

•

160-character, four-line display.

•

One to eight Signal Line Circuits (SLC) for up to 1584

addressable points.

•

Automatic default response for increased survivability.

•

1000-event history log.

•

Digital SLC protocol.

•

PC or front-panel programming.

•

Password protected.

•

Serial annunciator, remote display, and remote printer

options.

•

One-man, selectable-input walk test.

•

Automatic drift compensation.

•

Coded signaling.

•

Day/night mode settings.

•

Approved for Supervisory Service.

•

Optional UDACT.

•

Adjustable sensor sensitivity and temperature settings.

•

Operates as either a stand-alone panel or a network

node using SmartLink™.

IF632SS

An ISO 9000-2000 Company

SIGNALING

S521

APPROVED

FM