数据搜索系统,热门电子元器件搜索 |
|
ST95022M3TR 数据表(PDF) 6 Page - STMicroelectronics |
|
ST95022M3TR 数据表(HTML) 6 Page - STMicroelectronics |
6 / 16 page Read Operation The chip is first selected by putting S low. The serial one byte read instruction is followed by a one byte address (A7-A0), each bit being latched-in during the rising edge of the clock (C). Then the data stored in the memory at the selected address is shifted out on the Q output pin; each bit being shifted out during the falling edge of the clock (C). The data stored in the memory at the next address can be read in sequence by continuing to provide clock pulses. The byte address is automatically incremented to the next higher address after each byte of data is shifted out. When the highest ad- dress is reached, the address counter rolls over to 0h allowing the read cycle to be continued indefi- nitely. The read operation is terminated by dese- lecting the chip. The chip can be deselected at any time during data output. Any read attempt during a write cycle will be rejected and will deselect the chip. Byte Write Operation Prior to any write attempt, the write enable latch must be set by issuing the WREN instruction. First the device is selected (S = low) and a serial WREN instruction byte is issued. Then the product is de- selected by taking S high. After the WREN instruc- tion byte is sent, the ST95022 will set the write enable latch and then remain in standby until it is deselected. Then the write state is entered by selecting the chip, issuing two bytes of instruction and address, and one byte of data. Chip Select (S) must remain low for the entire duration of the operation. The product must be deselected just after the eighth bit of data has been latched in. If not, the write process is cancelled. As soon as the product is deselected, the self-timed write cycle is initiated. While the write is in progress, the status register may be read to check BP1, BP0, WEL and WIP. WIP is high during the self-timed write cycle. When the cycle is completed, the write enable latch is reset. C D AI01558 S Q A7 2 1 3456789 10 11 12 13 14 15 16 17 18 19 A6 A5 A4 A3 A2 A1 A0 20 21 22 23 7 65432 0 1 HIGH IMPEDANCE DATA OUT INSTRUCTION BYTE ADDRESS 0 Figure 6. Read Operation Sequence 6/16 ST95022 |
类似零件编号 - ST95022M3TR |
|
类似说明 - ST95022M3TR |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |