数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  

预览 PDF Download HTML

ST7MDTX-EMU2 Datasheet(数据表) 2 Page - STMicroelectronics

部件型号  ST7MDTX-EMU2
说明  REAL-TIME DEVELOPMENT TOOLS FOR THE ST7 MCU FAMILY
下载  4 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  STMICROELECTRONICS [STMicroelectronics]
网页  http://www.st.com
标志 

ST7MDTX-EMU2 Datasheet(HTML) 2 Page - STMicroelectronics

   
Zoom Inzoom in Zoom Outzoom out
 2 page
background image
2/4
ST7MDTx-EMU2
OVERVIEW
The ST7 real-time development tools consist of
various hardware and software components,
which together form a flexible and sophisticated
system designed to provide comprehensive devel-
opment support for the ST7 family of MCUs.
The Hardware Development System (HDS) main-
frame is common to all ST7 devices and, in con-
junction with various Dedication Board Emulators
(DBE), allows emulation and development of spe-
cific devices. Only the DBE and probe need to be
changed to emulate a new ST7 family device.
The development system is controlled by a Host
PC on which a choice of Windows-based software
may be run. The Host PC is simply connected to
the Emulator Mainframe by means of an RS-232
serial link or a parallel port. The STVD7 Windows
GNU Debugger software suite is supplied as
standard issue with the Emulator hardware, in ad-
dition to the conventional DOS ST7 Software
suite, which includes a macroassembler, a link-
er/loader. Third party C Toolchain and Debugger
software is also available. The Windows-based
debugger provides a user friendly and highly flexi-
ble interface which may be configured to precisely
match the user’s requirements. All emulator set-
tings are accessible via the control software.
Once assembled, and/or compiled and linked, the
application software may be downloaded to the
real-time emulation memory, which can be config-
ured, mapped and modified as required by the us-
er. The device probe is then connected to the ap-
plication target hardware in place of the MCU and
real-time emulation of the target application can
begin, thus allowing sophisticated testing and de-
bugging of both application hardware and soft-
ware.
User definable breakpoints allow the MCU to be
halted when the application software accesses
specific addresses, and/or addresses within a se-
lected range, and/or on data fetch cycles. The
user may then read and modify any register and
memory location. An on line assembler/disassem-
bler is also available to ease debugging.
An important feature of the ST7 development sys-
tem is that true source level debugging is possible,
meaning code may be viewed at source level and
breakpoints may be set on high level code, rather
than on disassembled target code. This is much
more meaningful to the user and ensures a more
convivial and productive development environ-
ment.
A separate and concurrent Logic Analyzer func-
tion is available. This hardware implemented func-
tion features 1KByte of 32-bit wide trace memory
which allows events to be defined for any combi-
nation of address (16 bits) and data (8 bits), as
well as according to the state of 3 internal and 5
external logic signals. Complex and sequential
conditions may be defined, and all bits are maska-
ble. The external signals are input from 5 probes
which can be connected to the target hardware.
Trace memory events may be used as break-
points or simply to trigger data acquisition accord-
ing to user specified parameters, without halting
the target system. Such a powerful tool enables
the user to detect and trap virtually any pattern,
and thus rapidly debug the target application.
Log files offer the ability to send any screen dis-
play to a text file. In particular, log files are very
useful to save the contents of the logic analyzer
and/or the contents of data registers to be subse-
quently analysed or printed.
Command files can be used to execute a set of
debugger commands in batch mode, to simplify
and speed up the emulation session.
Finally, when the target program is fully de-
bugged,
the
appropriate
ST7
EPROM/OTP/
FLASH programming board can be used to pro-
gram the EPROM/OTP/FLASH version of the tar-
get device to allow stand-alone testing and evalu-
ation.
123




HTML 页

1  2  3  4 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl