数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  



S-1131 Datasheet(数据表) 13 Page - Seiko Instruments Inc

部件型号  S-1131
说明  HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
下载  29 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  SII [Seiko Instruments Inc]
网页  http://www.sii.co.jp
标志 

S-1131 Datasheet(HTML) 13 Page - Seiko Instruments Inc

Zoom Inzoom in Zoom Outzoom out
 13 page
background image
HIGH RIPPLE-REJECTION LOW DROPOUT MIDDLE OUTPUT CURRENT CMOS VOLTAGE REGULATOR
Rev.3.0_01
S-1131 Series
Seiko Instruments Inc.
13
3. Shutdown pin (ON/OFF pin)
The products with shutdown function performs starting and a stop the regulator.
When the ON/OFF pin is set to the shutdown level, the operation of all internal circuits stops, and the built-
in P-channel MOS FET output transistor between the VIN pin and VOUT pin is turned off to substantially
reduce the current consumption. The VOUT pin becomes the Vss level due to the internally divided
resistance of several hundreds k
Ω between the VOUT pin and VSS pin.
The structure of the ON/OFF pin is as shown in Figure 14. Since the ON/OFF pin is neither pulled down
nor pulled up internally, do not use it in the floating state. In addition, note that the current consumption
increases if a voltage of 0.3 V to VIN – 0.3 V is applied to the ON/OFF pin. When the ON/OFF pin is not
used, connect it to the VSS pin if the logic type is “A” and to the VIN pin if it is “B”.
Table 7
Logic Type
ON/OFF Pin
Internal Circuits
VOUT Pin Voltage
Current Consumption
A
“L”: Power on
Operating
Set value
ISS1
A
“H”: Power off
Stopped
VSS level
ISS2
B
“L”: Power off
Stopped
VSS level
ISS2
B
“H”: Power on
Operating
Set value
ISS1
VSS
ON/OFF
VIN
Figure 14
Selection of Output Capacitor (CL)
The S-1131 Series performs phase compensation using the internal phase compensator in the IC and the ESR
(Equivalent Series Resistance) of the output capacitor to enable stable operation independent of changes in the
output load. Therefore, always place a capacitor (CL) of 2.2
µF or more between VOUT and VSS pins.
For stable operation of the S-1131 Series, it is essential to employ a capacitor whose ESR is within an optimum
range. Using a capacitor whose ESR is outside the optimum range (approximately 0.5 to 5
Ω), whether larger
or smaller, may cause an unstable output, resulting in oscillation. For this reason, a tantalum electrolytic
capacitor is recommended.
When a ceramic capacitor or an OS capacitor with a low ESR is used, it is necessary to connect an additional
resistor that serves as the ESR in series with the output capacitor.
The required resistance value is
approximately 0.5 to 5
Ω, which varies depending on the usage conditions, so perform sufficient evaluation for
selection. Ordinarily, around 1.0
Ω is recommended.
Note that an aluminum electrolytic capacitor may increase the ESR at a low temperature, causing oscillation.
When using this kind of capacitor, perform thorough evaluation, including evaluation of temperature
characteristics.




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28  29 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl