数据搜索系统,热门电子元器件搜索 |
|
TMP86FP24 数据表(PDF) 8 Page - Toshiba Semiconductor |
|
TMP86FP24 数据表(HTML) 8 Page - Toshiba Semiconductor |
8 / 217 page TMP86FP24 2007-08-24 86FP24-6 Pin Functions (1/2) Pin Name Input/Output Functions P07 ( SCK1 ) I/O (I/O) Serial clock input/output 1 P06 (TXD, SO1) I/O (Output) UART data output, serial data output 1 P05 (RXD, SI1) I/O (Input) UART data input, serial data input 1 P04 I/O P03 (TC2) I/O (Input) Timer counter 2 input P02 (INT2) I/O (Input) External interrupt 2 input P01 (INT1) I/O (Input) External interrupt 1 input P00 ( INT0 ) I/O (Input) 8-bit input/output port with latch. When used as a serial interface output or UART output, respective output latch (P0DR) should be set to “1”. When used as an input port, an serial interface input, UART input, timer counter input or an external interrupt input, respective output control (P0OUTCR) should be cleared to “0” after setting P0DR to “1”. External interrupt 0 input P15 (TC1) I/O (Input) Timer counter 1 input P14 (TC3, INT3) I/O (Input) Timer counter 3 input, External interrupt 3 input P13 ( PWM5 , PDO5 , TC5) I/O (I/O) PWM5 output, PDO5 output, Timer/counter 5 input P12 ( SCK2 ) I/O (I/O) Serial clock input/output 2 P11 (SI2) I/O (Input) Serial data input 2 P10 (SO2) I/O (Output) 6-bit input/output port with latch. When used as a timer/counter output or serial interface output, respective output latch (P1DR) should be set to “1”. When used as an input port, a timer counter input, an external interrupt input or serial interface input, respective output control (P1OUTCR) should be cleared to “0” after setting P1DR to “1”. Serial data output 2 P23 I/O P22 (XTOUT) I/O (Output) P21 (XTIN) I/O (Input) Resonator connecting pins (32.768 kHz) For inputting external clock, XTIN is used and XTOUT is opened. P20 ( INT5 , STOP ) I/O (Input) 4-bit input/output port with latch. When used as an input port or an external interrupt input, respective output control (P2OUTCR) should be cleared to “0” after setting output latch (P2DR) to “1”. External interrupt input 5 or STOP mode release signal input P37 to P30 I/O 8-bit input/output port with latch (N-ch high current output). When used as an input port, respective output control (P3OUTCR) should be cleared to “0” after setting output latch (P3DR) to “1”. P47 (SEG16) to P41 (SEG22) I/O (Output) 7-bit input/output port with latch. When used as an input port, respective output latch (P4DR) should be set to “1” after LCD output control (P4LCR) is cleared to “0”. LCD segment output P40 (SEG23, STOP4) I/O (I/O) 1-bit input/output port with latch. When used as an input port, the output latch (P4DR) should be set to “1” after the LCD output control (P4LCR) is cleared to “0”. When used as a LCD output, the P4LCR should be set to “1” after the STOPCR<STOP4EN> should be cleared to “0”. When used as a key-on wakeup input, the STOPCR<STOP4EN> should be set to “1”. LCD segment output STOP mode release input P53 I/O P52 I/O P51 ( DVO ) I/O (Output) Divider output P50 ( PPG ) I/O (Output) 4-bit input/output port with latch (N-ch high current output). When used as an input port, respective output control (P5OUTCR) should be cleared to “0” after setting output latch (P5DR) to “1”. When used as a PPG output or divider output, respective P5DR should be set to “1”. PPG output |
类似零件编号 - TMP86FP24 |
|
类似说明 - TMP86FP24 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |