h i

m

k

j

i

j

k

m

RELATED PRODUCTS

Trigger Socket E6647

Power Supply C6096

Dimensional Outline (Unit: mm)

Specifications

Dimensional Outline (Unit: mm)

14.8

±0.1

28.5

±1.0

5.5

73.5

±2.0

500

±20

RED : MAIN DISCHAGE VOLTAGE

METAL

BROWN : GND (TRIGGER)

BLACK : GND (MAIN)

WHITE : TRIGGER VOLTAGE

Parameter

Description/Value

Output Voltage

(dc)

300 V to 1000 V

60 W Max.

0.1

µF

180 V Typ.

0.22

µF

Internal / External

10 Hz to 100 Hz

360

Ω

Rectangular Waveform

5 V

24 V

± 1.2 V

90 W

Not Required

Approx. 550 g

Input Voltage (dc)

Power Consumption

Cooling

Weight

Trigger

Input

Section

Trigger

Section

Main

Power

Supply

Output Capacity

Stability

Main Supply Capacitor

Trigger Output Voltage

Trigger Capacitor

Trigger Type

Repetition Rate

Trigger Input Impedance

Input Waveform

Input Voltage

108

±2

174

±3

80.0

±0.5

14

2-M3

100.0

±0.5

2-M3

TLSXA0051EA

TLSXA0050EB

In order to operate a Xenon flash lamp, it is necessary to supply the prescribed high voltage between anode and

cathode, and to trigger probes. To facilitate the above operation, the trigger socket consists of high voltage

transformer and voltage divider resistors and capacitors chain to supply the appropriate pulse voltage to each

electrode.

As E6647 radiates heat from its metal parts during the operation due to the input energy, it is recommended to

use a cooling fan to keep the surface temperature of the metal parts at less than 50

°C.

C6096 has large capability to operate the lamp stable in spite of its compact dimensions. When 1 flash input

energy becomes over 0.05 J, it is necessary to have an additional external capacitor E7289-02 (option).

The range of 700 V to 1000 V is used for the operation

of 60 W Xenon flash lamp series.

In the case of connects temperature sensor lead lines

from the cooling jacket, the output voltage becomes 0 V

when the temperature sensor turns on.

When 1 flash input energy becomes over 0.05 J, it is

necessary to have an additional external capacitor

E7289-02 (option).

Don’t use beyond 60 Hz at the operation of 60 W input.

A trigger pulse voltage is supplied to each electrode at

the same time as an input trigger signal rise.

* Changing the length of the trigger socket cable vavies the current flowing through

the lamp so the lamp might fail to meet its required specifications. Use the cable length as shipped.