数据搜索系统,热门电子元器件搜索 |
|
TS5204 数据表(PDF) 2 Page - Taiwan Semiconductor Company, Ltd |
|
TS5204 数据表(HTML) 2 Page - Taiwan Semiconductor Company, Ltd |
2 / 4 page TS5204 series 2-2 2006/01 rev. A Recommend Operating Rating (Note 3) Input Supply Voltage Vin +2.5 ~ +16 V Electrical Characteristics Vin=Vo+1V, Io=100uA, Cout=1uF, Vce ≥2V, Tj = 25 oC, unless otherwise specified. Parameter Conditions Min Typ Max Unit Vin=Vo + 1V 0.97|Vo| 1.03|Vo| Output Voltage Vin=Vo + 1V, Io= 150mA 0.96|Vo| Vout 1.04|Vo| V Output Voltage Temp. Coefficient (Note 4) -- 50 -- ppm/ oC Line Regulation Vo+1V ≤ Vin ≤ 16V -- 0.1 0.5 % Load Regulation (Note 5) 0.1mA ≤ Io ≤ 150mA -- 0.1 0.5 % Io=100uA -- 20 -- Io=50mA -- 250 350 Io=100mA -- 350 450 Dropout Voltage (Note 6) Io=150mA -- 450 500 mV Io=100uA -- 110 150 Io=50mA -- 500 1000 Io=100mA -- 1000 1500 Ground Pin Current (Note 7) Io=150mA -- 2800 3500 uA Output Current Limit Vout=0V 150 200 -- mA Power Supply Rejection Ratio At f=100Hz, Io=100uA, -- 75 -- dB Thermal Regulation (Note 8) -- 0.05 -- %/W Output Noise Io=50mA, Cout=2.2uF, -- 260 -- nV√Hz Note 1: Exceeding the absolute maximum rating may damage the device. Note 2: The maximum allowable power dissipation at any Ta is Pd(max) = [ Tj(max) - Ta] + Өja. Exceeding the maximum allowable power dissipation will result in excessive die temperature, and the regulator will go into thermal shutdown. Note 3: The device is not guaranteed to function outside its operating rating. Note 4: Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range. Note 5: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range from 1mA to 150mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification. Note 6: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. Note 7: Ground pin current is the regulator quiescent current plus pass transistor base current. The total current drawn from the supply is the sum of the load current plus the ground pin current. Note 8: Thermal regulation is defined as the change in output voltage at a time “t” after a change in power dissipation is applied, excluding load or line regulation effects. Specifications are for a 150mA load pulse at Vin=16V for t=10mS. |
类似零件编号 - TS5204_06 |
|
类似说明 - TS5204_06 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |