数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  

预览 PDF Download HTML

TEA1095 Datasheet(数据表) 6 Page - NXP Semiconductors

部件型号  TEA1095
说明  Voice switched speakerphone IC
下载  28 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  PHILIPS [NXP Semiconductors]
网页  http://www.nxp.com
标志 

TEA1095 Datasheet(HTML) 6 Page - NXP Semiconductors

Zoom Inzoom in Zoom Outzoom out
 6 page
background image
1997 Nov 25
6
Philips Semiconductors
Product specification
Voice switched speakerphone IC
TEA1095
FUNCTIONAL DESCRIPTION
The values given in the functional description are typical
values except when otherwise specified.
A principle diagram of the TEA1096 is shown on the left
side of Fig.3. The TEA1096 is a transmission and
listening-in circuit. It incorporates a receiving amplifier for
the earpiece, a transmit amplifier for the microphone, a
loudspeaker amplifier and a hybrid. For more details on the
TEA1096 circuit (please refer to
Data Handbook IC03).
The right side of Fig.3 shows a principle diagram of the
TEA1095, a hands-free add-on circuit with a transmit
amplifier, a receiver amplifier and a duplex controller.
As can be seen from Fig.3, a loop is formed via the
sidetone network in the transmission circuit and the
acoustic coupling between loudspeaker and microphone
of the hands-free circuit. When this loop gain is greater
than 1, howling is introduced. In a full duplex application,
this would be the case. The loop-gain has to be much
lower than 1 and therefore has to be decreased to avoid
howling. This is achieved by the duplex controller. The
duplex controller of the TEA1095 detects which channel
has the ‘largest’ signal and then controls the gains of the
transmit amplifier and the receiver amplifier such that the
sum of the gains remains constant. As a result, the circuit
can be in three stable modes:
1. Transmit mode (Tx mode): the gain of the transmit
amplifier is at its maximum and the gain of the receiver
amplifier is at its minimum.
2. Receive mode (Rx mode): the gain of the receiver
amplifier is at its maximum and the gain of the transmit
amplifier is at its minimum.
3. Idle mode: the gain of the amplifiers is halfway
between their maximum and minimum value.
The difference between the maximum gain and minimum
gain is called the switching range.
Fig.3 Hands-free telephone set principles.
handbook, full pagewidth
MBG358
HYBRID
DUPLEX
CONTROL
telephone
line
acoustic
coupling
sidetone
TEA1096
TEA1095




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22  23  24  25  26  27  28 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl