数据搜索系统,热门电子元器件搜索 |
|
TDA9875 数据表(PDF) 3 Page - NXP Semiconductors |
|
TDA9875 数据表(HTML) 3 Page - NXP Semiconductors |
3 / 92 page 1998 Feb 13 3 Philips Semiconductors Preliminary specification Digital TV Sound Processor (DTVSP) TDA9875 1 FEATURES 1.1 Demodulator and decoder section • Sound IF (SIF) input switch e.g. to select between terrestrial TV SIF and SAT SIF sources • SIF AGC with 21 dB control range • SIF 8-bit Analog-to-Digital Converter (ADC) • DQPSK demodulation for different standards, simultaneously with 1-channel FM demodulation • NICAM decoding (B/G, I and L standard) • Two-carrier multistandard FM demodulation (B/G, D/K and M standard) • Decoding for three analog multi-channel systems (A2, A2+ and A2*) and satellite sound • Optional AM demodulation for system L, simultaneously with NICAM • Programmable identification (B/G, D/K and M standard) and different identification times. 1.2 DSP section • Digital crossbar switch for all digital signal sources and destinations • Control of volume, balance, contour, bass, treble, pseudo stereo, spatial, bass boost and soft-mute • Plop-free volume control • Automatic Volume Level (AVL) control • Adaptive de-emphasis for satellite • Programmable beeper • Monitor selection for FM/AM DC values and signals, with peak detection option • I2S-bus interface for a feature extension (e.g. Dolby surround) with matrix, level adjust and mute. 1.3 Analog audio section • Analog crossbar switch with inputs for mono and stereo (also applicable as SCART 3 input), SCART 1 input/output, SCART 2 input/output and line output • User defined full-level/−3 dB scaling for SCART outputs • Output selection of mono, stereo, dual A/B, dual A or dual B • 20 kHz bandwidth for SCART-to-SCART copies • Standby mode with functionality for SCART copies • Dual audio digital-to-analog converter from DSP to analog crossbar switch, bandwidth 15 kHz • Dual audio ADC from analog inputs to DSP • Two dual audio Digital-to-Analog Converters (DACs) for loudspeaker (Main) and headphone (Auxiliary) outputs; also applicable for L, R, C and S in the Dolby Pro Logic mode with feature extension. 2 GENERAL DESCRIPTION The TDA9875 is a single-chip Digital TV Sound Processor (DTVSP) for analog and digital multi-channel sound systems in TV sets and satellite receivers. 2.1 Supported standards The multistandard/multi-stereo capability of the TDA9875 is mainly of interest in Europe, but also in Hong Kong/Peoples Republic of China and South East Asia. This includes B/G, D/K, I, M and L standard. In other application areas there exists only subsets of those standard combinations otherwise only single standards are transmitted. M standard is transmitted in Europe by the American Forces Network (AFN) with European channel spacing (7 MHz VHF, 8 MHz UHF) and monaural sound. The AM sound of L/L’ standard is normally demodulated in the 1st sound IF. The resulting AF signal has to be entered into the mono audio input of the TDA9875. A second possibility is to use the internal AM demodulator stage, however this gives limited performance. Korea has a stereo sound system similar to Europe and is supported by the TDA9875. Differences include deviation, modulation contents and identification. It is based on M standard. An overview of the supported standards and sound systems and their key parameters is given in Table 1. |
类似零件编号 - TDA9875 |
|
类似说明 - TDA9875 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |