NDL5461P SERIES

The NEC PD/APD module has heat shrink tubing to protect the ferrule edge (*1) and the junction between the ferrule and the module

body (*2). In order to avoid breaking the fiber and/or optical coupling degradation, NEC recommends the following handling

precautions:

1. Do not make the fiber bend radius less than 30 mm (*3).

2. Do not bend the fiber within the 18 mm section from the module body (*4).

3. Do not stress the ferrule with a lateral force exceeding 500 g (*5).

HANDLING PRECAUTION FOR PD/APD MODULE

fiber

ferrule (*5)

module body

(*1)

30 mm MIN (*3)

18 mm MIN (*4)

(*2)

EXCLUSIVE NORTH AMERICAN AGENT FOR

RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS

CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279

24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM

2/24/2000

DATA SUBJECT TO CHANGE WITHOUT NOTICE