数据搜索系统,热门电子元器件搜索 |
|
MCR10 数据表(PDF) 2 Page - Rohm |
|
MCR10 数据表(HTML) 2 Page - Rohm |
2 / 5 page MCR10 Resistors Rev.A 2/4 F( ±1%) J ( ±5%) 0.15 ≤ R ≤ 9.1 (E24) (E24) (E24) (E24) ±250 0.1 ≤ R ≤ 0.13 (E24) 400 ±200 0.047 ≤ R ≤ 0.091 (E24) 500 ±300 0.1 ≤ R ≤ 0.13 400 ±200 0.15 ≤ R ≤ 0.91 ±250 500 ±300 0.047 ≤ R ≤ 0.091 Table 1 Resistance tolerance Resistance range ( Ω) Special specification L L S L L S Resistance temperature coefficient (ppm/ °C) Before using components in circuits where they will be exposed to transients such as pulse loads (short–duration, high– level loads), be certain to evaluate the component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that is greater than its rated voltage. Characteristics Item Test conditions (JIS C 5201-1) Resistor type Guaranteed value Resistance Variation of resistance with temperature Solderability Damp heat, steady state Endurance at 70 °C Endurance Rapid change of temperature Bend strength of the end face plating Resistance to solvent Resistance to soldering heat Overload ± (2.0%+0.005Ω) ± (1.0%+0.005Ω) ± (3.0%+0.005Ω) J : ±5% F : ±1% See Table.1 No remarkable abnormality on the appearance. A new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. Without mechanical damage such as breaks. JIS C 5201-1 4.5 JIS C 5201-1 4.8 Measurement : +25 / −55 / +25 / +125°C Load voltage : A Measuring method : measure upper termination by 4 proves. JIS C 5201-1 4.18 Soldering condition : 260 ±5°C Duration of immersion : 10 ±1s. JIS C 5201-1 4.24 40 °C, 93%RH Test time : 56days ± (3.0%+0.005Ω) ± (3.0%+0.005Ω) ± (0.5%+0.005Ω) ± (1.0%+0.005Ω) ± (1.0%+0.005Ω) JIS C 5201-1 4.25.1 70 °C, Rated voltage 1.5h : ON − 0.5h : OFF Test time : 1,000h JIS C 5201-1 4.25.3 155 °C Test time : 1,000h to 1,048h JIS C 5201-1 4.29 23 °C±5°C, Immersion cleaning, 5±0.5min. Solvent : 2-propanol JIS C 5201-1 4.19 Test temp. : −55°C to +125°C 5cyc JIS C 5201-1 4.33 JIS C 5201-1 4.17 Rosin-Ethanol (25%WT) Soldering condition : 235 ±5°C Duration of immersion : 2.0 ±0.5s. JIS C 5201-1 4.13 Rated voltage (current) ×2.5, 2s. Upper termination Prove |
类似零件编号 - MCR10_2 |
|
类似说明 - MCR10_2 |
|
|
链接网址 |
隐私政策 |
ALLDATASHEETCN.COM |
ALLDATASHEET是否为您带来帮助? [ DONATE ] |
关于 Alldatasheet | 广告服务 | 联系我们 | 隐私政策 | 链接交换 | 制造商名单 All Rights Reserved©Alldatasheet.com |
Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
Family Site : ic2ic.com |
icmetro.com |