数据搜索系统,热门电子元器件搜索
  Chinese▼

Delete All
ON OFF
ALLDATASHEETCN.COM

X  



MC44604_05 Datasheet(数据表) 3 Page - ON Semiconductor

部件型号  MC44604
说明  High Safety Pulsed Mode Standby GreenLine TM PWM Controller
下载  22 Pages
Scroll/Zoom Zoom In 100% Zoom Out
制造商  ONSEMI [ON Semiconductor]
网页  http://www.onsemi.com
标志 

MC44604 Datasheet(HTML) 3 Page - ON Semiconductor

 
Zoom Inzoom in Zoom Outzoom out
 3 page
background image
MC44604
http://onsemi.com
3
MAXIMUM RATINGS
Rating
Pin #
Symbol
Value
Unit
Total Power Supply and Zener Current
(ICC + IZ)
30
mA
Output Supply Voltage with Respect to Ground
2
1
VC
VCC
18
V
Output Current (Note 1)
3
mA
− Source
IO(Source)
−750
− Sink
IO(Sink)
750
Output Energy (Capacitive Load per Cycle)
W
5.0
mJ
Soft−Start
11
VSS
−0.3 to 2.2
V
Clamp Error Amp Input
12
VCLEA
−0.3 to 4.5
V
Foldback Input, Stand−by Management
−0.3 to VCC + 0.3
V
Overvoltage Protection, Current Sense Input, Rref, Error Amp Input,
Error Amp Output, CT, Stand−by Current Set
Vin
−0.3 to 5.5
V
Demagnetization Detection Input Current
8
mA
− Source
Idemag−ib (Source)
−4.0
− Sink
Idemag−ib (Sink)
10
Error Amplifier Output Sink Current
13
IE/A (Sink)
20
mA
Power Dissipation and Thermal Characteristics
Maximum Power Dissipation at TA = 85°C
PD
0.6
W
Thermal Resistance, Junction−to−Air
RqJA
100
°C/W
Operating Junction Temperature
TJ
150
°C
Operating Ambient Temperature
TA
−25 to +85
°C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit
values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied,
damage may occur and reliability may be affected.
1. Maximum package power dissipation must be observed.
ELECTRICAL CHARACTERISTICS (VCC and VC = 12 V [Note 2], Rref = 10 kW, CT = 820 pF, for typical values TA = 25°C,
for min/max values TA = −25° to +85°C [Note 3], unless otherwise noted.)
Characteristic
Pin #
Symbol
Min
Typ
Max
Unit
OUTPUT SECTION (Note 4)
Output Voltage (Note 5)
3
V
Low Level Drop Voltage (ISink = 100 mA)
(ISink = 500 mA)
VOL
1.0
1.4
1.2
2.0
High Level Drop Voltage (ISource = 200 mA)
(ISource = 500 mA)
VOH
1.5
2.0
2.0
2.7
Output Voltage During Initialization Phase
VCC = 0 to 1.0 V, ISink = 10 mA
VCC = 1.0 to 5.0 V, ISink = 100 mA
VCC = 5.0 to 13 V, ISink = 1.0 mA
3
VOL
0.1
0.1
1.0
1.0
1.0
V
Output Voltage Rising Edge Slew−Rate (CL = 1.0 nF, TJ = 25°C)
3
dVo/dT
300
V/
ms
Output Voltage Falling Edge Slew−Rate (CL = 1.0 nF, TJ = 25°C)
3
dVo/dT
−300
V/
ms
ERROR AMPLIFIER SECTION
Voltage Feedback Input (VE/A out = 2.5 V)
14
VFB
2.4
2.5
2.6
V
Input Bias Current (VFB = 2.5 V)
14
IFB−ib
−2.0
−0.6
mA
Open Loop Voltage Gain (VE/A out = 2.0 V to 4.0 V)
AVOL
65
70
dB
Unity Gain Bandwidth
BW
MHz
TJ = 25°C
TA = −25° to +85°C
5.5
Voltage Feedback Input Line Regulation (VCC = 10 V to 15 V)
14
VFBline−reg
−10
10
mV
2. Adjust VCC above the startup threshold before setting to 12 V.
3. Low duty cycle pulse techniques are used during test to maintain junction temperature as close to ambient as possible.
4. No output signal when the Error Amplifier is in Low State, i.e., VFB = 2.7 V.
5. VC must be greater than 5.0 V.




HTML 页

1  2  3  4  5  6  7  8  9  10  11  12  13  14  15  16  17  18  19  20  21  22 


数据表 下载




链接网址


Privacy Policy
ALLDATASHEETCN.COM
ALLDATASHEET是否为您带来帮助?  [ DONATE ]  

关于 Alldatasheet    |   广告服务   |   联系我们   |   隐私政策   |   书签   |   链接交换   |   制造商名单
All Rights Reserved© Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  , Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp  |   Russian : Alldatasheetru.com
Korean : Alldatasheet.co.kr   |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com  |   Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl